BB DUB PressFit (Road Wide) 86.5mm (including 2.5, 5.5 DUB spacer) 2021
BB DUB T47 (Road and Road Wide) 68mm (including 2.5, 3.0, 5.5 DUB spacer) 68MM
BB-M815 Saint 83mm HollowTech II Bottom Bracket Set - English Thread
BB-MT501 outboard bearing bottom bracket set, English thread, 68 / 73 mm
BB-MT800 MTB press fit bottom bracket with inner cover, for 104.5/107 mm
BB-MT800 MTB press fit bottom bracket with inner cover, for 92 or 89.5 mm
BB-MT801 bottom bracket cups, English thread cups, 68 / 73 mm
BB-MT801 bottom bracket cups, for FC-MX70 / MX71 HollowTech II chainset, 68 mm
BB-RS500 Road-fit bottom bracket 41 mm diameter with inner cover, for 86.5 mm
BBO-26 - BottomBear Bottom Bracket BB90 ¯37mm for ¯24mm axle
BBs for M30 THRU cranks - 30mm spindle 386 Evo
M30 Thru BB The Praxis M30 Thru BB is designed to be a proper bottom bracket (BB) for installing the Praxis Lyft Carbon Crank, RaceFace "Cinch", Rotor “REX” MTB Crank or CaneCreek eeWings. The Praxis patent pending design keeps the Enduro 6806 cartridge bearings outboard of the frame for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with. For Press Fit Options... Simply press in the longer non-drive-cup, then thread the shorter Drive cup into it. As the drive cup threads in, the trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and the collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.
BBs for SRAM DUB cranks BSA 68/73MM
This is the Praxis BSA threaded bottom bracket for installing an Sram DUB crank into a BSA threaded frame.
Bottom Bracket Spacer Kit Dub Mtb Wide (Qty 4 - Sizes 1x5.0mm, 1x7.5mm And 2x3.0mm)
BSA Campag UT 25mm Coated Bottom Bracket
English threading is the most common threaded bottom bracket standard these days and having a fast Campagnolo bottom bracket to fit it is the only way to get a Campy Ultra-Torque to mate. English threading the common name for BSA; the B standing for British. The shell is 68mm wide, the inner diameter 34mm, with the threading reversed on the drive side. Choose between two bearings for the crank. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
A bottle cage that can be placed everywhere on your bike. Set of 2 brackets to mount our bottle cage anywhere you want. TPR inlay designed to fit around a wide variety of aero tubes as well as round tubes. Fits on tubes up to 80mm in diameter.
Three sealed cartridge style bearings; two on the chain ring side and one on the non-drive side.
Evo Max Bottom Bracket Cups Evo Max integrated bottom bracket with sealed bearings For use with Oversized spindles of 24mm diameter Lightweight alloy cups AL 7075-T6
Freewheel/Bottom Bracket Spacer - 1mm width
High quality spare spacers for Freehub bodies and outboard bottom bracket cups Machined aluminium in natural silver colour
M810 Saint 68/73mm HollowTech II Bottom Bracket Set - English Thread
MegaEvo BB6300 ITA to 30mm Di2 Road Bottom Bracket
MegaEvo is a threaded bottom bracket that allows the installation of a BB386EVO crankset into a standard 70mm BB shell with ITA (Italian) threading.
MegaEvo Bbright Adapter (Frame: Bbright, Crank: 386Evo, V16)
MTB press fit 41 mm bottom bracket with inner cover, for 92 or 89.5 mm
One Bottom Bracket Square Taper Titanium/Carbon
With precision sealed bearings and cold-forged, aluminium CNC machined cups, the Box One™ Titanium Square Taper bottom brackets are the best option for young BMX racers and other users. It is a three-piece crank in search of performance gains and weight savings. They have hollow, custom titanium-nitride-coated titanium spindles and carbon fibre centre seals, helping keep the weight down between 185 and 190 grams (well below that of other square taper bottom brackets on the market). Other features include cups that are anodised black with anodised gold inner seals and a JIS tapered spindle that comes in either 108 or 113 mm. Features: Precision Abec-5 Sealed Bearings Lightweight Non-Structural Carbon Components Extra Rigid Titanium Spindle
Campagnolo Over Torque bottom bracket cups for the Over Torque chainset
In 2007, the Campy Tech Lab revolutionised the bottom bracket concept with the introduction of Ultra Torque technology. In 2011, another amazing solution had been devised for making the mid-range groups even more affordable, while maintaining and, in some cases improving, high level performance features.Ladies and gentlemen, meet the Power Torque System.
Primato Evo Light BSA Bottom Bracket
Primato Evo Light Bottom Bracket The Miche Primato Evo Light is a durable bottom bracket with lightweight BB cups and a very robust ISO square-taper axle. Especially suited for fixies, single speed bikes or track cycling because of the replaceable, sealed bearings. The Primato Evo Light is suited for frames with a width of 68mm (BSA) and has an axle length of 102mm. Material: AL 7075-T6 Axle Length: 102mm Bearings: Sealed Cartridge Thread: 1,370 x 24 tpi BSA Axle Fitment: ISO (Italian) Weight: 204g
Revo Bottom Bracket 30 for SRAM
SM-BB52 Deore outboard bearing bottom bracket set, British thread, 83 mm
SM-BB71 MTB press fit bottom bracket with inner cover, for 104.5 or 107mm x 41mm
SM-BB72 Ultegra Road 86.5/41mm Pressfit Bottom Bracket with Inner Cover
Spare - Bottom Bracket Spindle Spacer Kit Force Rival Apex Quarq,S-Series Road BB30 To BB386
T47 68mm 24mm Shimano Road Bottom Bracket
For T47 frame (threaded 47mm ID). For 24mm road Shimano cranks. Self adjusting wave washer eliminates side-to-side play. High quality sealed cartridge bearings.
Features: Triple bearing ISIS BB with reliable TAF forged Cr-Mo cups. Heavy duty 3 sealed cartridge bearings. Low profile dip centre. (improved inner frame BB clearance.) TAF Cr-Mo cups. (Strong and reliable). CNC Machined steel threads. Secondary water seals on cups. 68x113 E-type (suitable for use with chain devices if desired.) (Can also be used on 73mm std BB shell)
Box Two™ 24mm External bottom brackets feature cold-forged, CNC-machined alloy cups, dual-labyrinth bearing covers, and precision-sealed bearings. They are the perfect match to Box Three™ and Four ™ cranks, and the ultimate upgrade to the budget BBs sold with most cranksets. Box Two™, 24mm External Bottom Brackets, are designed to fit all 24-millimetre crank spindles and frames with 68 or 73 x BC 1.37-inch BSA threaded bottom bracket shells.
Two Oversized 30mm Bottom Bracket
Several of the upper-tier Box bottom brackets were engineered using Box Oversized Technology. These were developed in concert with the crank sets. We all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our bottom brackets, Box were obsessed with Power delivery/pedalling stiffness. To reduce lateral deflection, we chose to oversize the bottom bracket and therefore subsequently enlarged the spindle and the crank arm’s interfaces. This made room for larger bearing rings contributing to a vast increase in contact area. Box removed material from unloaded sections to reinforce the zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. Key differences: The Box Two M30 bottom bracket is a slightly less acute embodiment of our Oversized technology seen in the M35. Generously sized ABEC-5 bearings help reduce power loss to defection. The larger 30mm cross section is designed to mate up with the rest of the M30 line of Oversized cranksets.
Two Square-Taper Chromoly Bottom Bracket
Box Two™ Square Taper Chromoly Bottom Brackets are the best option for young BMX racers and other users of three-piece cranks in search of an affordable, high-performance square taper bottom bracket. Each bottom bracket is hand-assembled with a Chromoly spindle, sealed bearings, forged and CNC-machined alloy cups, and a composite centre spacer/seal.
US Waffen BMX Bottom Bracket Set
Waffen 22mm BMX Sealed Bearing Bottom Bracket. CNC machined alloy cups and flush bearing covers, with big, burly, high quality sealed cartridge bearings. Sliding axle system with spacers to allow a variable chainline. (Axle not included.)
