1/8 Fixed Sprockets with Carrier
1/8 Fixed Sprockets with Carrier Miche's unique system allows for a fast change of sprocket ratios. The splined adaptor screws onto the hub just like a normal cog, then simply slide the sprocket onto the carrier. Then both carrier and sprocket are held in place with the lockring. To change the ratio, simply undo the lockring and remove the sprocket. Slide on a different tooth size and refit the lockring. Because of the smaller diameter of a 13t sprocket, the actual sprocket is threaded and cannot be run with carrier. Made from Opaque chrome-plated steel Carrier is not supplied with MS16K, MS17K & MS18K Lockring sold separately
1/8" Integrated Fixed Sprockets
1/8" Integrated Fixed Sprockets Threaded track sprockets made from Opaque chrome-plated steel. Sprocket Material: Opaque Chrome-Plated Steel Teeth: 13 - 14 - 15 - 16 - 18 Compatibility: 1/8" Weight: 26g (13t)
Whether you’re cyclo-crossing in mud or grinding gravel, Praxis 1x rings are ready for action with the new Narrow Wide tooth profile.
The Renthal 1XR chainring tooth profiling ensures the highest level of chain retention, in all conditions. Alternating width teeth interlock with the chain for ultimate security, with no loss of efficiency. Intricate tooth profiling increases mud clearance and extends longevity. The Renthal 1XR offers ultimate chain retention performance and market leading durability. Wide Narrow Alternating 1.8 / 3.5mm teeth interlock, in sequence, with the inner and outer links of 9, 10, 11 or 12 speed chain, to give the highest levels of chain retention and efficiency. The tall, square tooth profile ensures the very high level of chain retention isn't reduced as the tooth face wears. All Weather Mud grooves, located in each tooth bed combined with ample clearance below the outer chain plates, allows dirt and mud to be purged clear of the drivetrain, improving performance and durability. High Strength A CAD I-Beam cross section is utilised to give the maximum strength and stiffness, with the lowest possible weight. CNC Machined The 1XR is fully CNC machined from 7075 T6 aluminium alloy. Utilising CNC machining production allows accurate tooth face profiling and the maximum width contact area with the chain rollers, for greater longevity. Ultra Durable After CNC machining, the 1XR chainring is hard anodised to give an incredibly durable surface finish. The chainring is further enhanced with the application of a 3-D graphic in a CNC machined recess.
Adventure 90BCD 2x11 Chainring
Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer and inner rings Anodized black with CNC silver Laser etched logos
Adventure Direct Mount 2x11 Chainring
Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer and inner rings Anodized black with CNC silver Laser etched logos
Alloy Modular MTB 68BCD 2x11 Chainring
Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer and inner rings Anodized black with CNC silver Laser etched logos
Alloy MTB 96BCD 2x10 Chainring
Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer and inner rings Anodized black with CNC silver Laser etched logos
Alloy Road 110BCD 2x11 Chainring
AL7075/T6 alloy chainrings Shifting ramps and stainless steel pins for outer and middle rings Black anodised Available in Shimano 10 speed (N10)
Features: Direct Mount for SRAM BB30 Cranks CNC 7075 Alloy Non Ramped BB30 Cranks only. Colour: Black
Heat treated stainless steel Heat treated chromoly chainring 14T, 15T, 16T, 17T, 18T, 19T, 20T Polished Silver or Black
Bosch G3 Ebike Chainring Direct Mount Boost
Direct mount steel chainring Ed Black
Bosch G3 Ebike Chainring Direct Mount with Guard Boost 148mm
Direct mount steel chainring CL: 53mm Boost 148mm Ed Black
Brose E-Bike Chainring Set With Spider
1 pair of chainrings designed for the Brose e-Bike system Each set consists of an Alloy outer and steel inner ring Steel chainring bolts 10 speed compatible BCD: 104/64mm Chainline: 49mm Finish: Blasted anodized black/ED black
Shimano compatible Spline fitting.9 Speed spaced, these cogs can be run 9speed or less, together with Shimano 9Spd gear shifter systems. Note: Teeth profiles are straight forward, making them ideal for Single Speed applications, however, with no twists or ramps etc, the gear shifting will not be as slick as with regular Shimano cogs when used in a multiple cog line-up.The large foot print caused by built-in spacing at the base of these machined cogs gives a larger foothold on the cassette body, making these a premium selection for Single Speed or multi-speed use with reduced risk of torque transfer damage to the cassette hub body. (Note: This point is especially important with Alloy or Ti Cassette bodies.)
Steel with Narrow-Wide type teeth, 104 BCD 4-arm 104-BCD spider bolt-on fitting. These hard-wearing E-bike suitable chainrings are designed for hi-performance use. Especially well-suited for off-road Mountain biking, where the Narrow – Wide tooth profile helps prevent the chain from jumping off. Wippermann utilises the processes established in their industrial sector for hardening the Connex chainrings, as well as the particularly high-performance cathodic dip coating. Specially developed for the high loads caused by e-bike drives, they are compatible for use with all common drive systems from Bosch, Yamaha, Brose, Bafang and many more. Of course, those bikes powered by human muscles can also benefit from using steel Connex super-hard wearing, high-performance chainrings.
Chain Ring Road 43T 94BCD 2X12 Force Wide With Cover Plate 2021 43T
50T 110 BCD
Chain Ring X-Sync 2 Direct Mount 6mm Offset Cold Forged Aluminum
Chain Ring X-SYNC Sprocket for Bosch motors 14T Straight Steel Black
Built with the needs of E-MTB riders in mind and incorporating the same X-SYNC chain management technology found in every SRAM 1x drivetrain.
Chain Ring X-SYNC STEEL 28T Direct Mount 3mm Offset Steel 3.5mm Black 11 speed
Chainring Xsync Eagle 36T DM Boost Bosch
Built with the needs of E-MTB riders in mind, and incorporating the same X-SYNC2 Eagle chain management technology found in every SRAM 1x drivetrain, offered for Bosch motors.
Comet Modular MTB Direct Mount 1x12 Chainring
BCD - Direct Mount. Narrow-Wide tooth profile. Drivetrain - 12 spd. Chain - Only Shimano 12 spd.
Compact Buzz Sport 110BCD Chainring
These Praxis compact 110BCD Road Chainring Sets are engineered for the highest performance shifts in all conditions.LevaTime® performance and Praxis Works proprietary forging process give the fastest shifts and longest lifetime of any Chainring on the planet.PLEASE NOTE: Chainring bolts are not included. EXCEPT with the 48/32 where custom ring bolts required for installation are included.Features LevaTime® shifting technology. Cold Forged Manufactured. BUZZ – For riders looking for our lightest offering. BUZZ SPORT– New for riders needing a simple economic replacement set. AERO TT – For riders wanting to minimise air disruption. 10/11/12 speed compatible
Direct Mount eBike Chainring - Bosch G3
Fits Bosch gen 3 motors 47mm Chainline
Direct Mount Ebike Chainring 1x12 Boost 148mm
Steel Megatooth. 36, 34T. Chainline: 52mm. BCD: Direct Mount. SH12 Compatible only with Shimano 12 speed chains
E-Bike Bosch Motor Sprockets Heat treated special steel sprocket to fit E-Bikes with a Bosch Motor.
Eagle X-SYNC 2 Chainring 38T Direct Mount Non-boost for Bosch
The Power of Choice Introducing EVO12 and EVO7. The embodiment of EVO and the culmination of TRP's extensive engineering and development history integrated with the world's top riders and teams. EVO means we have made advances to our first-generation features such the Hall Lock, silent clutch and cage release to improve performance and usability. The Hall Lock all but mitigates drivetrain noise to help riders stay focused and undistracted. EVO12 and EVO7’s instant, silent clutch tames unwanted chain slap and further quiets the entire shifting system. The cage release makes wheel removal a pleasant task. Couple these innovations with the all-new shifter design featuring improved ergonomics and a shift mode switch to allow riders the choice between one upshift per click or a sweep of up to five upshifts per click and you have a shifting system that is quiet, precise and efficient. Finally, carbon or forged alloy crank arms are mated to 1 x chainrings with Wave™ tooth profiles to hold the chain securely over the roughest terrain. Explore EVO12 and EVO7 and feel the power of choice.
The Power of Choice Introducing EVO12 and EVO7. The embodiment of EVO and the culmination of TRP's extensive engineering and development history integrated with the world's top riders and teams. EVO means we have made advances to our first-generation features such the Hall Lock, silent clutch and cage release to improve performance and usability. The Hall Lock all but mitigates drivetrain noise to help riders stay focused and undistracted. EVO12 and EVO7’s instant, silent clutch tames unwanted chain slap and further quiets the entire shifting system. The cage release makes wheel removal a pleasant task. Couple these innovations with the all-new shifter design featuring improved ergonomics and a shift mode switch to allow riders the choice between one upshift per click or a sweep of up to five upshifts per click and you have a shifting system that is quiet, precise and efficient. Finally, carbon or forged alloy crank arms are mated to 1 x chainrings with Wave™ tooth profiles to hold the chain securely over the roughest terrain. Explore EVO12 and EVO7 and feel the power of choice.
FC-4700/RS510 chainring fixing bolts - M8 8.5 mm (pack of 4)
FC-M540 double chainring fixing bolts and nuts - M8 x 8.5 mm - (set of 4)
FC-M8000 XT 11 speed double inner chainring 24T-BB for 34-24T
FC-M8000 XT 11 speed double inner chainring 28T-BD for 38-28T
FC-M8000 XT 11 speed double outer chainring 36T-BC for 36-26T
Gamma Pro/Alpha Drive 82BCD 1x11 Chainring
Stamped AL7075/T6 Shifting ramps and stainless steel pins on outer rings Anodized b lack Laser etched logo
Gossamer Pro AGX+ Direct Mount 2x11 Chainring
BCD: 90mm. Holes: 4. Drivetrain: 9, 10, 11 spd.
K-Force MTB Chainring 86BCD 2x9
Precision CNC machined AL7075/T6 Outer ring threaded for chainring bolt only (no nut required) Shifting ramps and stainless steel pins on outer rings Black anodized with CNC silver details Colour graphics and laser etched logos Ring Size: 40T
M MTB 1x NW 0mm DMA Offset Chainring
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Narrow Wide rings are machined from 7075 T6 aluminium and hard anodized to take a beating.
Miche Sprocket Lockring Special chrome-plated steel sprocket lockring. This is the correct track lockring for Miche and other European track hubs that use a different size lockring (33.6 x 24tpi) to other standard track hubs. This is a L/H thread lockring to secure a track cog on a track hub. Special chrome-plated
MTB 1x 104BCD NW - Steel / eBike Chain Ring
Cold forged from 4130 high-grade steel, our MTN E-Rings are designed specifically for e-MTN and longer wear. THREADED - These MTN E-Rings are ‘female‘ threaded for an M8 chain ring bolt. The M8 CR bolt threads directly into the 104BCD ring for better motor clearance.
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Narrow Wide rings are machined from 7075 T6 aluminium and hard anodized to take a beating.
MTB 1x 104BCD Wave Tech Chainring
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.Features: Installs on 4-arm 104BCD MTB crank RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2 In very rough terrain, or just for pure security, Praxis Works still recommend use of an upper guide
Features: Single chainring drive train setups are all the rage these days. With the introduction of exceedingly wide range 10- and 11-speed cassettes, the need for two chainrings has become a thing of the past. But when you only have one chainring, the only thing standing between you and a long walk back to the trailhead is you making sure you don't destroy your one chainring. That's why Surly made a charing guard to fit our O.D. cranks. It is made of aluminium and will take the hit for your chainring. It comes in 5 bolt, 94mm BCD.
OCHAIN Chain ring XX T-TYPE 104BCD CNC Aluminium (Mounting Hardware Included)
Powerbox Carbon Road 110BCD 2x11 Chainring
Precision CNC machined A7075/T6 Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Laser etched logos
Powerbox MTB 96BCD 1x11 Chainring
Precision CNC machined A7075/T6 Long tooth profile enhances chain retention Thick-think tooth design for maximum chain engagement Laser etched logos
Primato Advanced Pista 144pcd 1/8" Chainring
144pcd 1/8" Primato Advanced Pista Made of Ergal 7075, with an aerodynamic profile for high stiffness, Miche Advanced Pista Chainrings are CNC worked and lightened, anodised and laser branded. The perfect chainring for the Miche Primato Pista crankset. For 1/8" chains available in different versions from 44 teeth to 58 teeth. CNC machined 1/8" Chainrings Lightweight aerodynamic profiles with extra stiffness. Black anodised and laser etched 144 p.c.d. 5 Arm Available in 44t to 58t
Primato Track Chainring A lightweight, strong track specific chainring made from AL-7075 with Miche's Anodised Total Treatment PCD: 135mm Compatibility: Track 1/8" Material: AL 7075-T6 Anodised Total Treatment Weight: 84g (46t)
Pro Road 110BCD 2x11 Chainring
Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Colour graphics and laser etched logos Available in Shimano 10 speed (N10) or Campag 11 speed (C11)
Pro Road 120BCD 2x11 Chainring
Precision CNC machined A7075/T6 Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Laser etched logos 2x11 Fits Shimano 10 or 11 speed systems. 120mm BCD
SLK ABS Road 110BCD 2x11 Chainring
ABS (Asymmetric Bolt System) for use with SL-K Light ABS chainsets Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer rings Black anodized with CNC silver Laser etched logo
SLK Modular MTB 96BCD 2x11 Chainring
Precision CNC machined AL7075/T6 Long tooth profile enhances chain retention Thick-think tooth design for maximum chain engagement Anodized black with CNC silver Laser etched logos
Spare - Chain Ring MTB 38T 104 S1 49 Chainline AL5 2X10 Long Pin Blast Black (38/24) 10SPD 38T
Spare - Chain Ring Road 48T 110 V2 Aluminium 4mm Black GXP Long Pin (48-34) 48T
SRAM EAGLE CHAIN RING X-SYNC 12 SPEED DIRECT MOUNT 3MM OFFSET
Standard - 130BCD Buzz Chain Ring
So you brought your big boy legs did you? Well, these Praxis standard 130BCD road chainring sets are engineered for the highest performance shifts in all conditions and under any load. LevaTime® performance and our proprietary forging processes, give the fastest shifts and longest lifetime of any chainring on the planet. We offer them in a 2 different form factors. PLEASE NOTE: Chainring bolts are NOT included.
Steel Modular MTB 68BCD 2x11 Chainring
Steel inner chainring Hard wearing Compatible with 10 and 11 speed systems
Steel MTB 64BCD 2x11 Chainring
Precision CNC machined AL7075/T6 Shifting ramps and stainless steel pins on outer and inner rings Anodized black with CNC silver Laser etched logos
Steel MTB 64BCD 3x10 Chainring
Steel inner chainring Hard wearing Compatible with 10 and 11 speed systems
Super Road 130BCD 2x11 Chainring
Precision CNC machined A7075/T6 Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Laser etched logos
Truvativ Spare - Chain Ring MTB 44T 104 V4 Steel Matte Black 44T
Ultimate chain retention. All conditions.Features: Alternating 1.8 / 3.5mm width teeth. CNC machined 7075 T6 Aluminum. Hard anodised surface finish Mud grooves in the tooth bed Ultra stiff I-Beam cross section Mud clearance and wear-proof profiling 104mm BCD. Sizes: 32, 34, 36 and 38t Weight: 32t - 42g, 34t - 46g, 36t - 50g, 38t - 54g
Vero Pro Road 110BCD 2x11 Chainring 2017 Only
Shifting ramps and stainless steel pins on outer rings Black anodized with CNC silver Laser etched logo
Vero Road 120BCD 1x11 Chainring
Replacement chainrings for FSA Vero Road chainsets.
X-Ring Chainrings - 10/11/12 speed
LevaTime II is our new generation of shifting tech. Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. All of this adds up to the fastest and most snappy feeling shift we’ve ever produced. We believe so much in our new LevaTime II shifting that we’ve made this aftermarket upgrade kit available to our prior customers. So anyone with an older 3-Bolt Direct Mount Praxis road crank can upgrade immediately. So even if your 3-Bolt Direct Mount Praxis crank is a couple years old, you can simply order this new full kit and update your crank to LevaTime II shifting. LT2 Rings will only fit the LT2 Spider and they will not fit the LT1 Spiders found on first generation Zayante Carbon chainsets. First generation Zayante Carbon can be identified by NOT saying ‘LT2 rings only’ on the back of the spider. You can fit the complete LT2 ring and spider kits on first generation Zayante.
![Yamaha Ebike Chainring Set 2x11 104/64 BCD 48/36T [WA362/WB082]](https://www.tritoncycles.co.uk/images/products/thumbnails/1775765737-98734400.jpg)
Yamaha Ebike Chainring Set 2x11 104/64 BCD 48/36T [WA362/WB082]