Miche XM45 29" Disc Wheelset SRAM XD

XM45 29" Disc Wheels The XM45 Wheelset is the perfect entry-level wheelset or a great back up wheelset for when you're in need of a spare wheel. It has a 23c section rim with a convertible UST reinforcing sleeve for mounting tubeless ready tyres. The aluminium hubs are light and efficient and run on ultra-smooth bearings, to make sure you're riding as quick as possible. Miche proudly use Sapim spokes on their wheels due to the strength and reliability that Sapim are known for. The XM45 wheelset uses stainless steel J-Bend spokes and lace them so they're optimised for each wheel size, meaning that whichever size you buy, you'll get one tailor built specifically for that size. The front hub comes with 9mm QR adaptors fitted, remove the adaptors for use with a 15mm Bolt-Thru system.

Halo Vapour 29 MT Front Wheel

The Vapour is at the lighter end of the Vapour series and lends itself to XC riding, off road adventures and trail riding. Built with a 21mm internal width rim the Vapour wheel is ideal for a slightly narrower tyre. As well as a lightweight and dependable rim, the Vapour wheels utilise new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability. Supplied pre-taped the Vapour is tubeless ready from the box. Included Fittings: Front Standard: 15mm x 100 thru Front Boost: 15mm x 110 thru Rear Standard: 12mm x 142 thru, 9mm x 135 QR Rear Boost: 12mm x 148 thru

Halo Vapour GXC Tour 27.5" Disc Wheel

The Vapour GXC Tour wheelset has been crafted for the longest distance loaded touring adventures. Built with a 21mm internal width rim the Vapour GXC Tour wheel is ideal for touring, gravel, road plus and narrower MTB tyres. As well as a lightweight and dependable rim, the Vapour GXC Tour wheels utilise all new GXC hubs, specifically designed for the Vapour GXC wheel range. The GXC hubs feature instantaneous 120 point engagement, centre lock, sealed bearings and wide spaced flanges for increased stiffness and durability. With the increased 36 hole spoke count on these Touring optimised wheels, increased load weights are transferred directly through the wheel as spokes run parallel from one side of the rim, to the other. We have also used non-proprietary J-bend spokes to ensure should the worst happen, you have a great chance of being able to fix your wheel and carry on your adventure. Supplied pre-taped the Vapour GXC Tour wheelset is tubeless ready from the box.

Halo Ridge Line II 27.5" Wheel

Halo Ridge Line II 29" Wheel

Halo Vapour 35 MTC 27.5" Wheel

HALO's line of Vapour wheels are the lightweight edge. The trail focused Vapour 35 wheels are built with outright speed and reliability in mind. Utilising a wide 30mm internal width rim the Vapour 35 wheels bridge the gap between plus sized wheels and more narrow traditional offerings. With a greater width comes increased tyre volume and stability. In addition to an adept rim, the Vapour 35 wheels utilise all new instantaneous 120 point pick up, MTC Supadrive Boost and MTC Front Boost hubs, with center lock disc mounts, sealed bearings and super wide spaced flanges for increased stiffness and durability. 100% hand built and pre fitted with tubeless tape, Vapour 35 wheels are tubeless ready from the box. Included Fittings: Front Boost 15x110 thru Rear Boost 12mm x 148 thru

Halo Vapour GXC Tour 29" / 700c Wheel

Halo Vapour 35 MTC 29" Wheel

Halo Vapour 35 Stealth 27.5" MTB Wheel

Halo Gravitas MT Downhill 27.5" Wheel

Designed for and tested on the Downhill World Cup Circuit, for lap crushing confidence.With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.Using their tried and tested asymmetric design Halo have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.At the core of these Gravitas wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Gravitas wheels are tubeless ready from the box.Coloured decal kits available aftermarket.Included Fittings Front - 100: 100 x 15mm thru and DH 110 x 20mm thru Front - Boost 110: 110 x 15mm thru and Boost 110 x 20mm thru Rear - 142: 142 x 12mm thru and 135 x  10mm QR Rear - Boost 148: 148 x 12mm thru Rear - 150: 150 x 12mm thru and Super Boost 157 x 12mm thru

Halo Gravitas MTC Downhill 27.5" Wheel

Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.Using their tried and tested asymmetric design Halo have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.At the core of these Gravitas wheels are Halo's all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.Coloured decal kits available aftermarket.Included Fittings Front Boost 110 x 15mm thru Rear Boost 148 x 12mm thru

Bontrager Line Elite 30 TLR Boost 29 MTB Wheel

Halo Vapour 29 Rear Wheel

Halo Vapour GXC Dyno Tour 27.5 Front Wheel

Halo Vapour GXC 29" Dyno Front Wheel

Halo Vapour GXC 27.5 Wheel

Halo Vapour GXC 29" / 700c Wheel

Halo Vortex 27.5" Wheel

Halo Vapour 27.5 MTB Wheel

Halo SAS 26" Disc Wheel

Halo SAS 27.5" Wheel

Kinesis Maxlight V2 Trail Wheelset

Halo Vapour 35 29er Wheel

DMR Pro 26" Rear Wheel

All DMR wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range provides a choice of wheels for dirt jump, street riding, downhill or free-ride use.Build quality and spare parts - All the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodised hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling.

Halo T2 26" Mountain Bike Wheel

Middleweight multi-purpose 26" MTB wheels.Features: Light and strong, angular style box section rim, with eyelets and a stable screw-pin joint. The front wheel features the Halo MT front hub and the rear comes with the choice of either a sealed bearing Halo Spin Doctor hub or a sealed bearing single speed Combat hub. Both wheels come with  black ED finished spokes. The Black Anodised finish 32mm rims are suitable for Vs or Disc brakes, whilst the White Powder coated option is recommended for disc use only. Note: Anodised finish rims will accept V-brakes. but naturally, the brake surface colour finish will wear.

Halo Vapour 26" Front Wheel