Syndyt Pro BB Converter Cups

Salsa Cutthroat V2 BB Hatch Cover

Basso Palta Downtube Protection

Yeti Frame Protector Sheet

Praxis Works BBs for M30 THRU cranks - 30mm spindle BSA 68/73mm

M30 Thru BB The Praxis M30 Thru BB is designed to be a proper bottom bracket (BB) for installing the Praxis Lyft Carbon Crank, RaceFace "Cinch", Rotor “REX” MTB Crank or CaneCreek eeWings. The Praxis patent pending design keeps the Enduro 6806 cartridge bearings outboard of the frame for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with. For Press Fit Options... Simply press in the longer non-drive-cup, then thread the shorter Drive cup into it. As the drive cup threads in, the trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and the collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.

FSA Yamaha Ebike Spider for PW-X 1x/2x

For 1x and 2x chainring setups. Forged AL6061 spider. BCD: 104/64mm. 1x Chain Line: 53mm. 2x Chain Line: 51.5mm. Weight: 71g.  

FSA Bosch Ebike 1x11 Spider G4 Alloy V-Shape

Only compatible with V-Shape chainrings. Forged AL6061 spider.   BCD 104mm. W0134 - Chain Line (CL): 50mm, Offset: 5.2mm. W0138 - Chain Line (CL): 53mm, Offset: 8.2mm. W0140 - Chain Line (CL): 55mm, Offset: 9.9mm.  

FSA Headset Bearing ACB 8C-138 1.3/8" 48.9mm 45°×45° MR151

Outside Diameter: 48.9mm Inside Diameter: 37.0mm Height: 7.0mm Inside Angle: 45° Outside Angle: 45° TH Code: MR151  

FSA PRA MTB Hub End Caps

FSA NS ACR STSP Base Stem Spacer MW672

For use with FSA NS ACR Stems.

FSA Headset Crown Race H6050 for Big Fat Pig 1.5"

Replacement headset crown race Fits Big Fat Pig 1.5" steerer

FSA Headset Bearing ACB TH-800 1.1/8" 41.7mm 36°x45° MR075

Outside Diameter: 41.7mm Inside Diameter: 30.15mm Height: 7.8mm Inside Angle: 36° Outside Angle: 45° TH Code: MR075  

FSA Headset Bearing ACB TH-073E 1.1/2" 51.8mm 36°x45° MR127 MR226

Outside Diameter: 51.8mm Inside Diameter: 40.0mm Height: 8.0mm Inside Angle: 36° Outside Angle: 45° TH Code: MR127

FSA SX Pro Semi Integrated 1.1/8 - 1.5" 44.0/55.0mm Headset

1.1/8" / 1.5", 36°×45° ACB For tapered 50mm / 61mm OD head tube Forged alloy upper cup with CNC machined alloy lower cup Upper: 36°×45° ACB (blue seal) Lower: 1.5" 36°×45° ACB (black seal) Stack height: 18.8+2.4=21.2mm Weight: 110.2g

FSA Headset Crown Race H6079 for ACB No. 55 1.5"

Replacement headset crown race Fits No. 55 1.5" steerer TH part number: H6079  

FSA Micro Spacer for Headset 1pc

Microspacer for integrated and semi-integrated headsets Used to adjust top cap height to prevent interference with frame Steerer: 1.1/4", 1.1/8", 1"

FSA STSP SMR ST Front Cable Cap T2094

FSA stem front cap for STSP SMR stems. T2094  

FSA Bosch Ebike Spider G3

Bosch Gen 3 motor Forged AL6061 spider BCD - 104mm Bead blasted anodized black 54grams (W0120), 56grams (W0121)  

FSA Super Road 110BCD 2x11 Chainring

Precision CNC machined A7075/T6 Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Laser etched logos

FSA ACR Stem Spacer 5mm No Logo MW010

Stem spacer for FSA ACR stems. Allows for internal routing of cables.

FSA Pedal Washers Stainless

Protects and carbon alloy crank arms from galling and scratching caused by steel pedal threads Fits FSA cranks

FSA BB-6003 T47/68 Bottom Bracket for SRAM Dub

Adapts the T47 bottom bracket to fit SRAM Dub (29mm) cranks. Stainless cartridge bearings for increased durability. Includes 3 x spacers to fine tune fitting (1 x 2.5, 3, 5.5mm).

FSA HM1 Ebike System LED Push Button

LED HID push button. Top tube integrated. On-Off and assistance level selection. 5 bright colours.

FSA Disc Pad for Disc Brake Alloy Back Plate

FSA Chainring Spacers Alpha Drive OE

FSA Bosch Offset (Boost) G1/2 E-Bike Sprocket

Heat treated stainless steel 14T, 15T, 16T, 17T, 18T, 19T, 20T Stainless Silver

FSA Ebike Steel Chainring 1x12 104BCD

Steel Megatooth Narrow-Wide tooth profile. 44, 42, 40, 38, 36, 34T. Holes: 4. BCD: 104mm. SH12: compatible only with Shimano 12 speed chains.  

FSA T-30 Wrench

FSA CRSP Cover N11 Omega W0117

Replacement threaded insert for Omega chainring bolts.

FSA T47 Shimano Road Bottom Bracket

For T47 frame (threaded 47mm ID). For 24mm road Shimano cranks. (Axle Size) Self adjusting wave washer eliminates side-to-side play. High quality sealed cartridge bearings.

FSA BB-6003 T47/86 Bottom Bracket for SRAM Dub

Adapts the T47 bottom bracket to fit SRAM Dub (29mm) cranks. Stainless cartridge bearings for increased durability. Includes 3 x spacers to fine tune fitting (1 x 2.5, 3, 5.5mm).

FSA Gossamer Pro 2x Spider Cover V21 W1158

Replacement plastic cover for FSA Gossamer Pro AGX+ 2x chainsets.

FSA Maxon Ebike Crank Bolt QR-32

Replacement crank bolt for FSA Maxon Ebike cranks.

CeramicSpeed Wheel Bearing Press Tool Kit

Hidden CeramicSpeed bearing inside tool head for smooth function and reduced effort. Innovative Quick Release mechanism in tool head saves time. Premium steel punch included for hub designs incompatible with overcup extraction methods. Nesting drift design compatible with captive axel and removeable axel hubs. End-cap removal tool to aid removal of pressfit end caps that may become stuck or difficult to remove. Developed and designed in Denmark.

CeramicSpeed UFO Factory Optimized KMC 11S Chain

UFO Factory Optimized KMC 11S Chain Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark. This ultrafast chain has been optimised for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2-5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab. Maintenance of UFO Factory Optimized KMC 11S Chain Within 650 km/400 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected. In the case of light showers, we recommend applying UFO Drip Chain Coating. Allow the UFO Drip Chain Coating to dry off before riding. In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance. After 650 km/400 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 650 km/400 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 650 km/400 miles interval and decrease slightly after the UFO treatment wears off.

CeramicSpeed UFO Wet Weather Essentials Bundle

The UFO Wet Weather Essentials Bundle is tailored to riders who consistently ride in wet conditions or off the tarmac. Keep your drivetrain optimized and protected in the most challenging terrains and conditions.   Show your bike how much you care!  

CeramicSpeed UFO Bearings Race Day Grease

UFO Bearings Race Day Grease Is designed to deliver as low friction as possible, thanks to the Dynamic Viscosity Transformation (DVT) technology that applies as a foamy grease and changes to a lubricating oil film under pressure. 30ml.

CeramicSpeed OSPW System Cerakote Coated Campag 12 spd Pulley Wheels

OSPW for Campagnolo 12-speed EPS Cerakote Limited Edition The OSPW System for Campagnolo 12-speed EPS comes with a compact moulded carbon fibre cage for light weight and durability. The system offers a three spring tension setting that allows for optimal setup based on riding conditions. Like every other CeramicSpeed Oversized Pulley Wheel System, this is developed, designed and handbuilt in Denmark. The product comes with unique ceramic coated pulleys in Pink and White Cerakoate with a lifetime warranty. The system is not compatible with 12-speed mechanical.  

CeramicSpeed OHD SLT Headset Bearing SS 1.1/4" 35 x 47 x 7mm 36/45°

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty.  

CeramicSpeed Single Bearing Coated 61803

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed BB Seal and Dust Cover Service Tool

Unique multifunction tool provides an easy and clever way to remove secure fitting integrated dust covers, as well as assisting in alignment and simple installation of bearing seals and/or dust cover reinstallation. Supports easy dust cover removal and installation of seals and dust covers. Integrated Shimano crank preload tool. Compatible with CeramicSpeed dust covers and seals for Shimano 24mm bottom brackets, CeramicSpeed dust covers and seals for DUB 28.99mm bottom brackets, plus reinstallation of 30mm bearing seals. For road or off-road use.  

CeramicSpeed Preload Bolt for Shimano cranks

Replaces the plastic OE preload bolt on 24mm Shimano cranks.

CeramicSpeed Single Bearing Coated 24377

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903/18

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed OHD SLT Headset Bearing Kit Colnago G3X

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty. For more information about CeramicSpeed SLT bearings click here This kit contains 1 x 110942 and 1 x 110940 bearings.

CeramicSpeed Headset Bearings for Specialized Headset 5 Shiv Tri

CeramicSpeed headset bearings will take your handling of your bike to new levels, our bearings are built by hand in Denmark to ensure the highest performance and longevity. Specialized Headset 5 comes in two variants, with our CeramicSpeed Standard Bearings and with out Coated Bearings.The Coated Bearings offer an even longer lifetime and lower friction. Learn more about the coated advantage here

CeramicSpeed Single Bearing Coated 15267

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

Unior Open 16-notch External Bottom Bracket Wrench

A century of excellence for the next millennium Unior, the European hand tools producer, is a synonym for reliable, high-quality, and functionally designed hand tools around the world. Product details Perfect for any mechanic Fits standard 16-notch external bottom bracket cups Also fits Shimano Centerlock lockrings Single dipped handle

GT Fury 2010-13 Bottom Bracket Link Bearing Spacer

Trek 17x25x3 OCLV EX Bottom Bracket Pivot Washer

Campagnolo Bottom Bracket Cable Guide (4 pcs)

Problem Solvers Direct Mount Adapter