Basso Palta Downtube Protection

Basso Di2 / EPS Rubber Insert For Heart Seat Post

Wilier Interchangeable Front Derailleur Cover

Basso Frame Service Kit

Wilier Front Derailleur Support

Basso Palta Front Derailleur Support

M Part 6mm Spacer with Integrated Di2 Junction Box Mount

Deda Elementi S-DCR Cover Kit

S-DCR cover kit is a further application of DCR system (Deda internal cable routing). This solution makes Deda Superzero, Superleggero, Zero100, Zero2, Zero1, Zero, Cross and Peak stem fitting a DCR frame, a quick and smart solution for most of bicycle brands. It allows the full integration of the cables into the frame, like the DCR headset, but leaving a portion of the cables visible under the stem. The system works with a standard tapered fork steerer (1-1/8"- 1.5") and requires a 52mm (1.5") upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork.

FSA Yamaha Ebike Spider for PW-X 1x/2x

For 1x and 2x chainring setups. Forged AL6061 spider. BCD: 104/64mm. 1x Chain Line: 53mm. 2x Chain Line: 51.5mm. Weight: 71g.  

FSA Bosch Ebike 1x11 Spider G4 Alloy V-Shape

Only compatible with V-Shape chainrings. Forged AL6061 spider.   BCD 104mm. W0134 - Chain Line (CL): 50mm, Offset: 5.2mm. W0138 - Chain Line (CL): 53mm, Offset: 8.2mm. W0140 - Chain Line (CL): 55mm, Offset: 9.9mm.  

FSA Headset Bearing ACB 8C-138 1.3/8" 48.9mm 45°×45° MR151

Outside Diameter: 48.9mm Inside Diameter: 37.0mm Height: 7.0mm Inside Angle: 45° Outside Angle: 45° TH Code: MR151  

FSA PRA MTB Hub End Caps

FSA NS ACR STSP Base Stem Spacer MW672

For use with FSA NS ACR Stems.

FSA Headset Crown Race H6050 for Big Fat Pig 1.5"

Replacement headset crown race Fits Big Fat Pig 1.5" steerer

FSA Headset Bearing ACB TH-800 1.1/8" 41.7mm 36°x45° MR075

Outside Diameter: 41.7mm Inside Diameter: 30.15mm Height: 7.8mm Inside Angle: 36° Outside Angle: 45° TH Code: MR075  

FSA Headset Bearing ACB TH-073E 1.1/2" 51.8mm 36°x45° MR127 MR226

Outside Diameter: 51.8mm Inside Diameter: 40.0mm Height: 8.0mm Inside Angle: 36° Outside Angle: 45° TH Code: MR127

FSA SX Pro Semi Integrated 1.1/8 - 1.5" 44.0/55.0mm Headset

1.1/8" / 1.5", 36°×45° ACB For tapered 50mm / 61mm OD head tube Forged alloy upper cup with CNC machined alloy lower cup Upper: 36°×45° ACB (blue seal) Lower: 1.5" 36°×45° ACB (black seal) Stack height: 18.8+2.4=21.2mm Weight: 110.2g

FSA Headset Crown Race H6079 for ACB No. 55 1.5"

Replacement headset crown race Fits No. 55 1.5" steerer TH part number: H6079  

FSA Micro Spacer for Headset 1pc

Microspacer for integrated and semi-integrated headsets Used to adjust top cap height to prevent interference with frame Steerer: 1.1/4", 1.1/8", 1"

FSA STSP SMR ST Front Cable Cap T2094

FSA stem front cap for STSP SMR stems. T2094  

FSA Bosch Ebike Spider G3

Bosch Gen 3 motor Forged AL6061 spider BCD - 104mm Bead blasted anodized black 54grams (W0120), 56grams (W0121)  

FSA Super Road 110BCD 2x11 Chainring

Precision CNC machined A7075/T6 Shifting ramps and stainless steel pins for outer and middle rings Black anodised with CNC details Laser etched logos

FSA ACR Stem Spacer 5mm No Logo MW010

Stem spacer for FSA ACR stems. Allows for internal routing of cables.

FSA Pedal Washers Stainless

Protects and carbon alloy crank arms from galling and scratching caused by steel pedal threads Fits FSA cranks

FSA BB-6003 T47/68 Bottom Bracket for SRAM Dub

Adapts the T47 bottom bracket to fit SRAM Dub (29mm) cranks. Stainless cartridge bearings for increased durability. Includes 3 x spacers to fine tune fitting (1 x 2.5, 3, 5.5mm).

FSA HM1 Ebike System LED Push Button

LED HID push button. Top tube integrated. On-Off and assistance level selection. 5 bright colours.

FSA Disc Pad for Disc Brake Alloy Back Plate

FSA Chainring Spacers Alpha Drive OE

FSA Bosch Offset (Boost) G1/2 E-Bike Sprocket

Heat treated stainless steel 14T, 15T, 16T, 17T, 18T, 19T, 20T Stainless Silver

FSA Ebike Steel Chainring 1x12 104BCD

Steel Megatooth Narrow-Wide tooth profile. 44, 42, 40, 38, 36, 34T. Holes: 4. BCD: 104mm. SH12: compatible only with Shimano 12 speed chains.  

FSA T-30 Wrench

FSA CRSP Cover N11 Omega W0117

Replacement threaded insert for Omega chainring bolts.

FSA T47 Shimano Road Bottom Bracket

For T47 frame (threaded 47mm ID). For 24mm road Shimano cranks. (Axle Size) Self adjusting wave washer eliminates side-to-side play. High quality sealed cartridge bearings.

FSA BB-6003 T47/86 Bottom Bracket for SRAM Dub

Adapts the T47 bottom bracket to fit SRAM Dub (29mm) cranks. Stainless cartridge bearings for increased durability. Includes 3 x spacers to fine tune fitting (1 x 2.5, 3, 5.5mm).

FSA Gossamer Pro 2x Spider Cover V21 W1158

Replacement plastic cover for FSA Gossamer Pro AGX+ 2x chainsets.

FSA Maxon Ebike Crank Bolt QR-32

Replacement crank bolt for FSA Maxon Ebike cranks.

Colnago K Zero Headset

Steerer: 1.1/8" Upper: 41.0mm Lower: 41.0mm  

CeramicSpeed OHD SLT Headset Bearing SS 1.1/4" 35 x 47 x 7mm 36/45°

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty.  

CeramicSpeed OHD SLT Headset Bearing Kit Colnago G3X

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty. For more information about CeramicSpeed SLT bearings click here This kit contains 1 x 110942 and 1 x 110940 bearings.

CeramicSpeed Headset Bearings for Specialized Headset 5 Shiv Tri

CeramicSpeed headset bearings will take your handling of your bike to new levels, our bearings are built by hand in Denmark to ensure the highest performance and longevity. Specialized Headset 5 comes in two variants, with our CeramicSpeed Standard Bearings and with out Coated Bearings.The Coated Bearings offer an even longer lifetime and lower friction. Learn more about the coated advantage here

Box Components Two Stem Spacers

Box Two Stem Spacers Extruded and CNC-machined from 6061-T6 aluminium, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimetres.

Trek Madone SL Painted Headset Cover

Bbb BHP-21 - Extender Steerer Extender 28.6-25.4mm

Bbb BHP-20 - Extender Steerer Extender 25.4-22.2mm

Trek 2021 Emonda SL Painted Headset Covers

Trek Madone SLR Headset Cover

Columbus Carbon Fork Expander Bung

Dia Compe Cable Guide Clamp