Bontrager Rapid Drive 108XC Snap Ring

Genuine replacement parts When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.  

Mavic ID360 Grease

Mavic instant drive grease for ID360 freehubs pack of 10.

Mavic Tracomp Rings And Clips

Tracomp rings with clips for Mavic wheel hubs with Tracomp carbon spokes.  

Mavic Ratchet ID360 Kit

Mavic Ratchets for maintaining or updating your ID360 wheel mechanism. Suitable for all Mavic wheels with ID360 instant drive hubs.  

Mavic Adjustment System Kit QRM ID360

The Mavic Kit Adjust System QRM Auto ID360 is designed for use in Mavic rear wheels that feature the QRM Auto bearing setup.

Microshift Sword Black 2x9 Groupset

Sword Black 2x9 Groupset offers outstanding entry level value for a performance gravel type bike. This groupset consists of drop-bar Brake levers/shifters, 2x9 Rear mech, front mech and a medium-wide ratio Cassette to deliver a wide range of usable gears for most riding styles.  Just add your selection of 2x9 Sword Black cranks, BB and a suitable pair of disc brake calipers to complete your slick shifting entry groupset into performance 2x9 Gravel bike riding. Features Sword Black drop-bar shifters pair modern features with analogue operation. The lever body has a gradually rounded outer edge that’s designed to pair well with flared handlebars, giving you the comfort and control you need even on rough terrain. The brake lever has a higher pivot point and pull more cable than the average road lever, making your mechanical disc brakes feel stronger and easier to control. The Sword Black 2x rear derailleur features a modern and innovative design with elegant mechanical operation at an exceptional value price. The long cage is designed to use with a double chainring and a medium-wide ratio 9spd cassette. Microshift’s CS-H093, 9sp Cassette is a durable Steel, H-series-Advent type sprocket set for HG type freehubs, with fast shifting and a smart ED Black finish. The medium-wide range 11-38T 9spd ratios combined with a 2X crankset and the Braze-on mounted front gear mech gives a very large range of dependable gears at your fingertips.

Microshift Sword Black 1x9 Groupset

Sword Black 1x9 Groupset offers outstanding entry level value for a performance gravel type bike. This groupset consists of drop-bar Brake levers/shifters, 1 x 9 Rear mech and a wide ratio Cassette. Just add your selection of 1x9 Sword Black cranks, BB and a suitable pair of disc brake calipers to complete your slick shifting entry groupset into performance 1x9 Gravel bike riding. Features Sword Black drop-bar shifters pair modern features with analogue operation. The lever body has a gradually rounded outer edge that’s designed to pair well with flared handlebars, giving you the comfort and control you need even on rough terrain. The brake lever has a higher pivot point and pulls more cable than the average road lever, making your mechanical disc brakes feel stronger and easier to control. The Sword Black 1x rear derailleur features a modern and innovative design with elegant mechanical operation at an exceptional value price. The cage is designed to be used with a single chainring and a wide ratio 9 speed cassette up to 48t. Microshift’s CS-H093, 9 speed cassette is a durable Steel, H-series-Advent type sprocket set for HG-type freehubs, with fast shifting and a smart ED Black finish. The choice of 11-42T or 11-46T 9spd gearing gives a large range of dependable gears at your fingertips.

Stans Axle - Neo / Neo ULT - REAR - 12x150/157

This rear axle fits Neo 12x150/157mm Boost hubs. This axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with Neo hubs. Not compatible with E-sync or M-pulse hubs.  

Stans Neo Freehub Spacer Kit Red

This spacer slides onto the axle before freehub installation on all Neo hubs. Red anodising makes it easier to locate if dropped.  

Stans Spacer Tube - Neo 6 bolt - FRONT - 9/15x100mm

This LTE spacer is a lightweight alternative to the comparable STD model. This replacement spacer sleeve for 100mm width 6-bolt Neo 15mm thru-axle and 9mm QR front hubs ensures perfect bearing alignment and keeps the axle centred on the bearing. Must be used with compatible bearings. Compatible only with #6902 bearings measuring 15x28x7mm. Not compatible with any Centerlock hub. Not compatible with M-pulse or E-sync hubs.  

Stans Spacer Tube - Neo / Neo ULT 6 bolt - REAR - 12x135/142mm

This lightweight spacer fits between the bearings of 6-bolt Neo 12x135 and 12x142mm rear hubs. Compatible only with Neo and Neo Ultimate 6-bolt hubs. Not compatible with any Centerlock hubs. Not compatible with E-sync or M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 15mm (E01 - E01)

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo Centrelock - FRONT - 12mm (E23 - E02)

This pair of front-end caps is designed to fit Centerlock E-sync hubs when used with 12mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits Centerlock E-sync, Neo, and Neo Ultimate front hubs. Compatible with forks that use a 12mm axle. Not compatible with 6-bolt or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync OS/Neo OS - FRONT - QR (E07 - E07)

This pair of front-end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits 6-bolt E-sync OS and Neo OS hubs. Not compatible with Centerlock or non-OS versions of E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans Axle - E-Sync / Neo - REAR - 12x135/142 & Singlespeed

This steel rear axle provides maximum durability for E-sync and Neo 135mm, 142mm, and single-speed hubs. With only a 38g weight difference over our standard alloy axle, the steel axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with E-sync and Neo 6-bolt and Centerlock hubs. Not compatible with 148mm or 157mm E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans E-Sync / Neo / Neo ULT 6 bolt - Conversion Kit for Front QR

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Also compatible with Neo and Neo Ultimate hubs. Not compatible with Centerlock hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.  

Hub End Cap: Vision SH11 U2081 MW633

Replacement hub end caps for Vision hubs U2081

Vision Freehub Spacer Steel U2140 MW315 14mm

Replacement freehub spacer for Vision hubs code U2140.

CeramicSpeed Wheel Bearing Press Tool Kit

Hidden CeramicSpeed bearing inside tool head for smooth function and reduced effort. Innovative Quick Release mechanism in tool head saves time. Premium steel punch included for hub designs incompatible with overcup extraction methods. Nesting drift design compatible with captive axel and removeable axel hubs. End-cap removal tool to aid removal of pressfit end caps that may become stuck or difficult to remove. Developed and designed in Denmark.

Box Components Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs

Box Components One Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs Size: 20-10mm

DMR Swopout Dropout - mk1 - 12 mm Maxle Bosses

DMR Swopout Dropout - mk3 - 142 x 12mm

DMR Swopout Dropout - mk4 - 142 x 12mm - PLUS 8

Surly 12mm Dropout Adaptor

DMR V3 Swopout Dropout

DMR Swopout 12mm Bolt Through Mk1.5 Dropout

Salsa Alternator 1.0/2.0 UDH Plate Kit