M Part Self-adhesive cable guides

Backcountry Research Mutherload Yeti 1.5" Strap

Backcountry Research Camrat Strap

Backcountry Research Mutherload Strap

Stans Nipple Washers (Shop Pack) 500pcs

This Shop pack is made for wheel builders who prefer the added piece of mind of building with nipple washers. Their stainless steel nipple washers increase the strength of the rim, while reducing friction at the nipple, to make wheel building easier. A nipple washer can be used with both brass and alloy spoke nipples. Nipple washers are not required for building with Stans rims.   Stainless construction adds durability and resists corrosion Adds rims strength and reduces friction with the nipple Designed to fit easily in spoke holes 500pcs for frequent wheel builds Nipple Washers (7.3mm OD)  

Stans #6900 Bearings 10x22x6mm

This #6900 sealed cartridge bearing measures 10x22x6mm and relies on stainless steel construction for smooth, long-lasting performance. Sold as a pair of two bearings.

Stans Axle - Neo / Neo ULT - REAR - 12x150/157

This rear axle fits Neo 12x150/157mm Boost hubs. This axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with Neo hubs. Not compatible with E-sync or M-pulse hubs.  

Stans Neo Freehub Spacer Kit Red

This spacer slides onto the axle before freehub installation on all Neo hubs. Red anodising makes it easier to locate if dropped.  

Stans Spacer Tube - Neo 6 bolt - FRONT - 9/15x100mm

This LTE spacer is a lightweight alternative to the comparable STD model. This replacement spacer sleeve for 100mm width 6-bolt Neo 15mm thru-axle and 9mm QR front hubs ensures perfect bearing alignment and keeps the axle centred on the bearing. Must be used with compatible bearings. Compatible only with #6902 bearings measuring 15x28x7mm. Not compatible with any Centerlock hub. Not compatible with M-pulse or E-sync hubs.  

Stans Spacer Tube - Neo / Neo ULT 6 bolt - REAR - 12x135/142mm

This lightweight spacer fits between the bearings of 6-bolt Neo 12x135 and 12x142mm rear hubs. Compatible only with Neo and Neo Ultimate 6-bolt hubs. Not compatible with any Centerlock hubs. Not compatible with E-sync or M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 15mm (E01 - E01)

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo Centrelock - FRONT - 12mm (E23 - E02)

This pair of front-end caps is designed to fit Centerlock E-sync hubs when used with 12mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits Centerlock E-sync, Neo, and Neo Ultimate front hubs. Compatible with forks that use a 12mm axle. Not compatible with 6-bolt or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync OS/Neo OS - FRONT - QR (E07 - E07)

This pair of front-end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits 6-bolt E-sync OS and Neo OS hubs. Not compatible with Centerlock or non-OS versions of E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans Axle - E-Sync / Neo - REAR - 12x135/142 & Singlespeed

This steel rear axle provides maximum durability for E-sync and Neo 135mm, 142mm, and single-speed hubs. With only a 38g weight difference over our standard alloy axle, the steel axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with E-sync and Neo 6-bolt and Centerlock hubs. Not compatible with 148mm or 157mm E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans E-Sync / Neo / Neo ULT 6 bolt - Conversion Kit for Front QR

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Also compatible with Neo and Neo Ultimate hubs. Not compatible with Centerlock hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.  

Granite STASH RT Ratchet Multi-Tool 9pcs with Steerer Housing

The Granite Stash range is a three-part system with innovative ways to store tools on your bike. It comprises the Multi-Tool which fits inside your steerer tube, and also a Chain Tool / Tyre Plug which fit either end of your handlebars. Each part of the system is sold separately. The Granite Stash-RT Multi-Tool fits in your steerer tube. Please note that it differs from the standard Granite Stash Multi-Tool. Firstly, it has a slimmer design than the Stash, which means that Stash-RT is compatible with almost all forks, including those where the inside of the steerer tube is tapered. (If you are unsure about fitment, please contact your fork manufacturer). Secondly, the Stash-RT utilises a two way ratchet system which fits compactly with its 9 tool bits, as opposed to the conventional style multi-tool of the Stash. Spring loaded tool secures all parts snugly and makes them easy to access. Stash-RT cycle computer mounts for Garmin, Bryton and Wahoo devices are available to purchase separately. (Cycle computer mounts are not available for the standard Stash). Available in black or orange.

DMR Swopout Dropout - mk1 - 12 mm Maxle Bosses

DMR Swopout Dropout - mk1 - Horizontal - 10mm

DMR Swopout Dropout - mk3 - 142 x 12mm

DMR Swopout Dropout - mk4 - 142 x 12mm - PLUS 8

Kinesis Head Badge

Kinesis 23mm Bung for Tracer Fork - 1-1/8

Kinesis 22mm Bung for Tripster Fork - 1-1/8

Bbb BHP-22 - TubeExtend Steerer Extender 28.6mm (Black)

Trek Speed Concept Steering Axle

Problem Solvers Direct Mount Adapter