DYEDBRO SHUSH Chainstay Protector

Yeti Apex Gear Belt Black

Nukeproof Mega Carbon Lower Swing Link Kit

Nukeproof Mega & Megawatt Alloy Lower Swing Link Kit

Yeti Frame Protector Sheet

Yeti Derailleur Hanger Kit 12 x 148mm Black

Peatys HoldFast Trail Tool Wrap

Marzocchi Bomber Air Volume Spacer

Deda Elementi S-DCR Cover Kit

S-DCR cover kit is a further application of DCR system (Deda internal cable routing). This solution makes Deda Superzero, Superleggero, Zero100, Zero2, Zero1, Zero, Cross and Peak stem fitting a DCR frame, a quick and smart solution for most of bicycle brands. It allows the full integration of the cables into the frame, like the DCR headset, but leaving a portion of the cables visible under the stem. The system works with a standard tapered fork steerer (1-1/8"- 1.5") and requires a 52mm (1.5") upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork.

Hub End Cap: Vision DB TA12 Team 30/35/SC Front MW632

Replacement hub end caps for Vision Team 30 Disc, Team 35 Disc or SC front wheels.

Hub End Cap: Vision SH11 U2081 MW633

Replacement hub end caps for Vision hubs U2081

Vision Freehub Spacer Steel U2140 MW315 14mm

Replacement freehub spacer for Vision hubs code U2140.

Vision Team Clip-On Armrest Bolt Kit ML066H, MW225, ML436

Replacement armrest bolts for Vision Team Clip-On bars. Includes 16 & 12mm bolts, washers and nuts.

Hub End Cap: Vision DB QR NS XDR U5111 U5126 MW050

Replacement hub end caps for Vision NS Disc wheels. Compatible with hub codes: U5111 and U5126.

Vision TriMax 30 DB Rear Hub Centre Lock X12 28H U2092

Replacement rear hub for Vision TriMax 30 Disc rear wheel with Centre Lock rotor mounts.

Vision Spacer for Team 35 RB U2082 Rear Hub MW574

Replacement rear hub spacer for Vision Team 35 rim brake wheels.  

Ferodo Brake DOT 5.1 Fluid

Technical Details Dry boiling point: 270°C Wet boiling point: 185°C Kinematic viscosity (Cst): 800 at -40°C Main Features Recommended for general all-round use Adheres to DOT 5.1 specification Very low viscosity means ideally suited for ABS / ESP braking systems Low corrosion Very low rubber swell

CeramicSpeed UFO Bearings Race Day Grease

UFO Bearings Race Day Grease Is designed to deliver as low friction as possible, thanks to the Dynamic Viscosity Transformation (DVT) technology that applies as a foamy grease and changes to a lubricating oil film under pressure. 30ml.

CeramicSpeed Single Bearing Coated 61803

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 24377

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903/18

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 15267

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

Bbb MultiVis 3M Refletive Sticker Kit

Bike protection with black reflection, safe and conspicuous! Stickers suited for us on: frame, rims, helmet, shoes and other bike components. 23 stickers in 7 different shapes to cover the whole bike.

DMR APS Mounts - Pair

Zefal Skin Armor