Stans Nipple Washers (Shop Pack) 500pcs

This Shop pack is made for wheel builders who prefer the added piece of mind of building with nipple washers. Their stainless steel nipple washers increase the strength of the rim, while reducing friction at the nipple, to make wheel building easier. A nipple washer can be used with both brass and alloy spoke nipples. Nipple washers are not required for building with Stans rims.   Stainless construction adds durability and resists corrosion Adds rims strength and reduces friction with the nipple Designed to fit easily in spoke holes 500pcs for frequent wheel builds Nipple Washers (7.3mm OD)  

Stans #6900 Bearings 10x22x6mm

This #6900 sealed cartridge bearing measures 10x22x6mm and relies on stainless steel construction for smooth, long-lasting performance. Sold as a pair of two bearings.

Stans Axle - Neo / Neo ULT - REAR - 12x150/157

This rear axle fits Neo 12x150/157mm Boost hubs. This axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with Neo hubs. Not compatible with E-sync or M-pulse hubs.  

Stans Neo Freehub Spacer Kit Red

This spacer slides onto the axle before freehub installation on all Neo hubs. Red anodising makes it easier to locate if dropped.  

Stans Spacer Tube - Neo 6 bolt - FRONT - 9/15x100mm

This LTE spacer is a lightweight alternative to the comparable STD model. This replacement spacer sleeve for 100mm width 6-bolt Neo 15mm thru-axle and 9mm QR front hubs ensures perfect bearing alignment and keeps the axle centred on the bearing. Must be used with compatible bearings. Compatible only with #6902 bearings measuring 15x28x7mm. Not compatible with any Centerlock hub. Not compatible with M-pulse or E-sync hubs.  

Stans Spacer Tube - Neo / Neo ULT 6 bolt - REAR - 12x135/142mm

This lightweight spacer fits between the bearings of 6-bolt Neo 12x135 and 12x142mm rear hubs. Compatible only with Neo and Neo Ultimate 6-bolt hubs. Not compatible with any Centerlock hubs. Not compatible with E-sync or M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 15mm (E01 - E01)

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo Centrelock - FRONT - 12mm (E23 - E02)

This pair of front-end caps is designed to fit Centerlock E-sync hubs when used with 12mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits Centerlock E-sync, Neo, and Neo Ultimate front hubs. Compatible with forks that use a 12mm axle. Not compatible with 6-bolt or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync OS/Neo OS - FRONT - QR (E07 - E07)

This pair of front-end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits 6-bolt E-sync OS and Neo OS hubs. Not compatible with Centerlock or non-OS versions of E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans Axle - E-Sync / Neo - REAR - 12x135/142 & Singlespeed

This steel rear axle provides maximum durability for E-sync and Neo 135mm, 142mm, and single-speed hubs. With only a 38g weight difference over our standard alloy axle, the steel axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with E-sync and Neo 6-bolt and Centerlock hubs. Not compatible with 148mm or 157mm E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans E-Sync / Neo / Neo ULT 6 bolt - Conversion Kit for Front QR

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Also compatible with Neo and Neo Ultimate hubs. Not compatible with Centerlock hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.