SRAM Chain Ring X-SYNC Eagle Steel 6mm Offset

SRAM Chain Ring X-SYNC Eagle Steel 3mm Offset

Connex Panasonic Type e-Bike Chainrings

Specialities Ta 104pcd Chinook 8/9X 4-Arm Outer Chainrings

SRAM Power Meter Spider AXS E1 For Threaded Mount Chainrings - Red (Including 8 Bolts And Thread Back Up Pin For Chainring)

SRAM Power Meter Spider Axs E1 For Threaded Mount Chainrings - Force E1 (Including 8 Bolts And Thread Back Up Pin For Chainring)

Praxis Works X-Ring Chainrings - 10/11/12 speed

LevaTime II is our new generation of shifting tech. Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. All of this adds up to the fastest and most snappy feeling shift we’ve ever produced. We believe so much in our new LevaTime II shifting that we’ve made this aftermarket upgrade kit available to our prior customers. So anyone with an older 3-Bolt Direct Mount Praxis road crank can upgrade immediately. So even if your 3-Bolt Direct Mount Praxis crank is a couple years old, you can simply order this new full kit and update your crank to LevaTime II shifting. LT2 Rings will only fit the LT2 Spider and they will not fit the LT1 Spiders found on first generation Zayante Carbon chainsets. First generation Zayante Carbon can be identified by NOT saying ‘LT2 rings only’ on the back of the spider. You can fit the complete LT2 ring and spider kits on first generation Zayante.  

Praxis Works 160/104 BCD LT2 X-Ring Chainring with Spider

Praxis Works MTB 1x 104BCD Wave Tech Chainring

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.Features: Installs on 4-arm 104BCD MTB crank RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2 In very rough terrain, or just for pure security, Praxis Works still recommend use of an upper guide