Miche X2 RD R81 Ultegra Chainring

Miche X2 RD R81 Ultegra Power Meter Chainring

Miche X2 RD R92 Dura Ace Chainring

Miche X2 RD R92 Dura Ace Power Meter Chainring

Miche UTG R12 12x Chainrings

Miche UTG R81 12x Chainrings

Miche UTG R92 12x Chainrings

Miche 144pcd 1/8" Primato Advanced Pista Chainring

Miche Singlespeed Freewheel

Singlespeed Freewheel Miche freewheel sprockets in steel, suited for double sided hubs with a thread on one side. Available with 16 or 18 teeth. Type: Freewheel Sprocket Material: Steel Sizes: 16t/18t Weight: 144g

Miche Primato Track Chainring

Primato Track Chainring A lightweight, strong track specific chainring made from AL-7075 with Miche's Anodised Total Treatment PCD: 135mm Compatibility: Track 1/8" Material: AL 7075-T6 Anodised Total Treatment Weight: 84g (46t)

Miche Sprocket Lockring

Miche Sprocket Lockring Special chrome-plated steel sprocket lockring. This is the correct track lockring for Miche and other European track hubs that use a different size lockring (33.6 x 24tpi) to other standard track hubs. This is a L/H thread lockring to secure a track cog on a track hub. Special chrome-plated

Miche E-Bike Bosch Motor Sprocket

E-Bike Bosch Motor Sprockets Heat treated special steel sprocket to fit E-Bikes with a Bosch Motor.

Miche Primato Advanced Pista 144pcd 1/8" Chainring

144pcd 1/8" Primato Advanced Pista Made of Ergal 7075, with an aerodynamic profile for high stiffness, Miche Advanced Pista Chainrings are CNC worked and lightened, anodised and laser branded. The perfect chainring for the Miche Primato Pista crankset. For 1/8" chains available in different versions from 44 teeth to 58 teeth. CNC machined 1/8" Chainrings Lightweight aerodynamic profiles with extra stiffness. Black anodised and laser etched 144 p.c.d. 5 Arm Available in 44t to 58t

Miche 1/8" Integrated Fixed Sprockets

1/8" Integrated Fixed Sprockets Threaded track sprockets made from Opaque chrome-plated steel. Sprocket Material: Opaque Chrome-Plated Steel Teeth: 13 - 14 - 15 - 16 - 18 Compatibility: 1/8" Weight: 26g (13t)

Miche 1/8 Fixed Sprockets with Carrier

1/8 Fixed Sprockets with Carrier Miche's unique system allows for a fast change of sprocket ratios. The splined adaptor screws onto the hub just like a normal cog, then simply slide the sprocket onto the carrier. Then both carrier and sprocket are held in place with the lockring. To change the ratio, simply undo the lockring and remove the sprocket. Slide on a different tooth size and refit the lockring. Because of the smaller diameter of a 13t sprocket, the actual sprocket is threaded and cannot be run with carrier. Made from Opaque chrome-plated steel Carrier is not supplied with MS16K, MS17K & MS18K Lockring sold separately

Miche 144PCD Primato Advanced Pista Chainring