Wethepeople Network Frame

Wethepeople Trigger Frame

Salsa Fargo 32 Steel Frameset

SEIDO Mgv Fork

SEIDO Banjo Fork

SEIDO Bps Fork

SEIDO Rgt Cabon Fork

SEIDO Taza Fork

Kinesis Range Plus Fork

DMR Sect Frame Replacement Taper Loc Washers (2pc)

DMR Sect 24 Custom Frame

DMR Sect 26 Custom Frame

Syndyt SYB200 Expert XL - BMX Race Frame

Syndyt SYB205 Pro - BMX Race Frame

Syndyt SYB210 Pro XL - BMX Race Frame

Syndyt SYB215 Pro 2XL - BMX Race Frame

Syndyt SYB220 Pro 3XL - BMX Race Frame

Syndyt SYB225 Pro 4XL - BMX Race Frame

Syndyt SYB204 Pro - Cruiser BMX Frame

Syndyt Axle Adaptors

Syndyt Axle Washer Kit

Syndyt SYB185 Junior - BMX Race Frame

Syndyt SYB190 Junior XL - BMX Race Frame

Syndyt SYB195 Expert - BMX Race Frame

Box Components Box One XE Expert Carbon Forks

Salsa Timberjack Frame

Dt Swiss Rim Magnet Presta

Ohlins DH38 M.2 Coil TTX18 Downhill Suspension Fork 29/27.5"

Ohlins DH38 M.2 Air TTX18 Downhill Suspension Fork 29/27.5"

MAHLE X30 iX3+ Battery Pack

Norco Sight A 29/27.5 Frame 2026

Whether you’re carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2026 Sight takes the best of the Range platform and has tightened it up into a light, pedal friendly, maneuverable, high-pivot package. VPSHP Suspension Platform Designed around Norco’s VPSHP (Virtual Pivot Suspension | High Pivot) suspension layout, it increases rearward axle path to improve suspension performance in technical terrain, while retaining the dynamic and responsive feel that riders expect from a do-it-all All-Mountain bike. Through extensive testing using an i-track configured idler location, anti-squat has been tuned for efficiency and responsive feel under power. The idler mounted to the chainstay manages chain growth and pedal-kickback. Swapping the linkarm and lower shock mount with our “Missing Link Kit” converts between 29” and 27.5” to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup. Includes Missing Link Kit to allow for 29" and mixed wheelsize options. Details 160mm/150mm of travel with 29" and MX options (Sight 160 models feature 170mm/160mm of travel, MX wheels only). 29" and mixed wheelsizes (Sight 160 MX wheels only). Available in carbon and aluminum. VPSHP suspension platform. Norco Design Technology Every Sight features 4-piston hydraulic disc brakes and 200/180mm rotors. Ride Aligned™ - Perfect fit, dialed handling and personalized setup in minutes. No Other Way Limited Lifetime Warranty.

Deda Elementi 1 1/2 Tapered Gera EDG Straight Gravel Disc Fork

Surly Ogre Frameset - Orloks Shadow

Surly Moonlander Fork

Surly Preamble Fork

Norco QR Shaft M9 X L206 For 190mm Hub

SRAM Grease SRAM Butter 500ml Container Friction Reducing Grease by Slickoleum - Recommended for SRAM Double Time Hubs & Wheels RockShox Forks and Reverb Service

SRAM EP Speed Ring 6 Bolt For Eagle Transmission

SRAM Axle Maxle Stealth Rear, Length 180mm, Thread Length 13mm, Thread Pitch M12X1.0 - Boost UDH

Ritchey Wcs Carbon Brevet Fork

MAHLE Xs Smart Controller A + Energy Hub

MAHLE Xs Smart Controller B + Energy Hub

MAHLE Xs Smart Controller C + Energy Hub

MAHLE X20 Front Hub

MAHLE X30/X20 Energy Hub

SKS Chainblade Black (Max 38 Teeth) Hub Gears Only

SKS Chainblade Black (Max 42-44 Teeth) Hub/Derailleur Gears

SKS Chainbow Chainguard

RockShox Fork Zeb Ultimate Flight Attendant - 29" (Bolt On Fender 2 Btm Tokens Star Nut Maxle StealthBattery Charger) A3

RockShox Fork Lyrik Ultimate Flight Attendant - 29" Boostô15X110 Tpr Smcrownod 44Offset Db+ (Bolt On Fender2 Btm TokensStar NutMaxle StealthBatteryCharger) A3

RockShox Fork Pike Ultimate CHARGER 3.1 RC2 - 29" C2

RockShox Fork Sid Ultimate Race Day - 3P Remote 29" Boostô15X110 120mm 44Offset Tapered Debonair D1 120MM

RockShox Fork SID Select Charger RL - 3P Crown 29" Boostô 15x110 120mm Black Alum STR TPR 44offset DebonAir (includes ZipTie Fender, Star nut, Maxle Stealth) D1 120MM

RockShox Fork SID Ultimate Race Day - 2P Remote D1 (Includes Ziptie Fender, Star Nut, Maxle Stealth)(Remote Sold Seperate) 120MM

RockShox Fork SID Ultimate Race Day - 3P Crown D1 (Includes Ziptie Fender, Star Nut, Maxle Stealth) 120MM

RockShox Fork SID Ultimate Race Day - 3P Remote D1 (Includes Ziptie Fender, Star Nut, Maxle Stealth)(Remote Sold Seperate) 120MM

RockShox Fork Sid Ultimate Race Day - 3P Crown 29" Boostô15X110 120mm 44Offset Tapered Debonair (Includes Bolt Onfender, Star Nut, Maxle Stealth) D1 120MM

RockShox Lyrik Select 27.5" 44Offset MY23

Shimano MU-UR500 Alfine Di2 motor unit, 5-speed

Shimano MU-UR510 Alfine Di2 motor unit, 11-speed

Shimano MU-UR500 Alfine Di2 motor unit, 11-speed

Shimano MU-UR500 Alfine Di2 motor unit, 8-speed

Bosch Charging Cable Micro USB - USB-C®

Bosch SmartphoneHub Mounting Kit for handlebar diameter 35.0 mm

Marzocchi Bomber DJ GRIP Tapered Fork 2024

Fazua RIDE 60 Splitter

Fazua RIDE 60 LED Hub Hook Screw

Fazua RIDE 60 Service Starter Kit

Fazua RIDE 60 Control Hub

Fazua RIDE 60 LED Hub Frame Unit

Fazua RIDE 60 LED Hub Hook

Fazua RIDE 60 LED Hub

Fazua RIDE 60 LED Hub + Mode Control

Fazua RIDE 60 Ring Control

Fazua RIDE 60 Mode Control

Bontrager Rapid Drive 108XC Snap Ring

Genuine replacement parts When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.  

Norco Optic C Mountain Bike Frame Kit 2025

Start your custom trail build the right way. The Norco Optic C Mountain Bike Frame Kit 2025 is your foundation for a trail bike that’s fast, light, and incredibly capable. With a carbon frame and Norco’s innovative VPSHP suspension layout, the Optic C delivers exceptional traction, control, and playful handling—ready to be built into your dream short travel machine.   Supplied with a Fox Float X Factory shock, the Norco Idler Guide, and hardware for mixed wheel or 29” setups, this is the perfect starting point for a next-level trail bike. Key Features   Carbon frame with 125mm rear travel and Ride Aligned™ geometry VPSHP high-pivot suspension platform for maximum control and fun Supplied with Fox Float X Factory rear shock and Norco Idler Guide UDH compatible, with rear axle and hardware included Ready for 29" or mixed wheel (MX) setups Includes Norco Alloy Nutted Clamp (38.5mm ID) No Other Way Limited Lifetime Warranty

Mavic ID360 Grease

Mavic instant drive grease for ID360 freehubs pack of 10.

Mavic Tracomp Rings And Clips

Tracomp rings with clips for Mavic wheel hubs with Tracomp carbon spokes.  

Mavic Ratchet ID360 Kit

Mavic Ratchets for maintaining or updating your ID360 wheel mechanism. Suitable for all Mavic wheels with ID360 instant drive hubs.  

Mavic Adjustment System Kit QRM ID360

The Mavic Kit Adjust System QRM Auto ID360 is designed for use in Mavic rear wheels that feature the QRM Auto bearing setup.

Deda Elementi 1 1/8 Gera Allroad Disc Fork

Gera Allroad is a superlight fork ideal for allroad use. The design facilitates the integration of cables inside the frame, thanks to its D-shape fork steerer and the DCR system. Compatible with most bicycle frames on the market, whether they are made of carbon or metal. Its full carbon construction and an integrated 45 degree crown race ensure strength and lightweight performance. It is designed to accommodate dynamo hubs too, such as the SON, allowing for optimal integration of electric cables inside the fork.

Microshift Sword Black 2x9 Groupset

Sword Black 2x9 Groupset offers outstanding entry level value for a performance gravel type bike. This groupset consists of drop-bar Brake levers/shifters, 2x9 Rear mech, front mech and a medium-wide ratio Cassette to deliver a wide range of usable gears for most riding styles.  Just add your selection of 2x9 Sword Black cranks, BB and a suitable pair of disc brake calipers to complete your slick shifting entry groupset into performance 2x9 Gravel bike riding. Features Sword Black drop-bar shifters pair modern features with analogue operation. The lever body has a gradually rounded outer edge that’s designed to pair well with flared handlebars, giving you the comfort and control you need even on rough terrain. The brake lever has a higher pivot point and pull more cable than the average road lever, making your mechanical disc brakes feel stronger and easier to control. The Sword Black 2x rear derailleur features a modern and innovative design with elegant mechanical operation at an exceptional value price. The long cage is designed to use with a double chainring and a medium-wide ratio 9spd cassette. Microshift’s CS-H093, 9sp Cassette is a durable Steel, H-series-Advent type sprocket set for HG type freehubs, with fast shifting and a smart ED Black finish. The medium-wide range 11-38T 9spd ratios combined with a 2X crankset and the Braze-on mounted front gear mech gives a very large range of dependable gears at your fingertips.

Microshift Sword Black 1x9 Groupset

Sword Black 1x9 Groupset offers outstanding entry level value for a performance gravel type bike. This groupset consists of drop-bar Brake levers/shifters, 1 x 9 Rear mech and a wide ratio Cassette. Just add your selection of 1x9 Sword Black cranks, BB and a suitable pair of disc brake calipers to complete your slick shifting entry groupset into performance 1x9 Gravel bike riding. Features Sword Black drop-bar shifters pair modern features with analogue operation. The lever body has a gradually rounded outer edge that’s designed to pair well with flared handlebars, giving you the comfort and control you need even on rough terrain. The brake lever has a higher pivot point and pulls more cable than the average road lever, making your mechanical disc brakes feel stronger and easier to control. The Sword Black 1x rear derailleur features a modern and innovative design with elegant mechanical operation at an exceptional value price. The cage is designed to be used with a single chainring and a wide ratio 9 speed cassette up to 48t. Microshift’s CS-H093, 9 speed cassette is a durable Steel, H-series-Advent type sprocket set for HG-type freehubs, with fast shifting and a smart ED Black finish. The choice of 11-42T or 11-46T 9spd gearing gives a large range of dependable gears at your fingertips.

Stans Axle - Neo / Neo ULT - REAR - 12x150/157

This rear axle fits Neo 12x150/157mm Boost hubs. This axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with Neo hubs. Not compatible with E-sync or M-pulse hubs.  

Stans Neo Freehub Spacer Kit Red

This spacer slides onto the axle before freehub installation on all Neo hubs. Red anodising makes it easier to locate if dropped.  

Stans Spacer Tube - Neo 6 bolt - FRONT - 9/15x100mm

This LTE spacer is a lightweight alternative to the comparable STD model. This replacement spacer sleeve for 100mm width 6-bolt Neo 15mm thru-axle and 9mm QR front hubs ensures perfect bearing alignment and keeps the axle centred on the bearing. Must be used with compatible bearings. Compatible only with #6902 bearings measuring 15x28x7mm. Not compatible with any Centerlock hub. Not compatible with M-pulse or E-sync hubs.  

Stans Spacer Tube - Neo / Neo ULT 6 bolt - REAR - 12x135/142mm

This lightweight spacer fits between the bearings of 6-bolt Neo 12x135 and 12x142mm rear hubs. Compatible only with Neo and Neo Ultimate 6-bolt hubs. Not compatible with any Centerlock hubs. Not compatible with E-sync or M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 15mm (E01 - E01)

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo Centrelock - FRONT - 12mm (E23 - E02)

This pair of front-end caps is designed to fit Centerlock E-sync hubs when used with 12mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits Centerlock E-sync, Neo, and Neo Ultimate front hubs. Compatible with forks that use a 12mm axle. Not compatible with 6-bolt or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync OS/Neo OS - FRONT - QR (E07 - E07)

This pair of front-end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits 6-bolt E-sync OS and Neo OS hubs. Not compatible with Centerlock or non-OS versions of E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans Axle - E-Sync / Neo - REAR - 12x135/142 & Singlespeed

This steel rear axle provides maximum durability for E-sync and Neo 135mm, 142mm, and single-speed hubs. With only a 38g weight difference over our standard alloy axle, the steel axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with E-sync and Neo 6-bolt and Centerlock hubs. Not compatible with 148mm or 157mm E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans E-Sync / Neo / Neo ULT 6 bolt - Conversion Kit for Front QR

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Also compatible with Neo and Neo Ultimate hubs. Not compatible with Centerlock hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.  

Trek 2022 Crockett Rigid Forks

Genuine replacement parts Get back on the road with a genuine replacement fork. The fork you need. Product details Color matched for direct compatibility  

Hub End Cap: Vision DB TA12 Team 30/35/SC Front MW632

Replacement hub end caps for Vision Team 30 Disc, Team 35 Disc or SC front wheels.

Hub End Cap: Vision SH11 U2081 MW633

Replacement hub end caps for Vision hubs U2081

Vision Freehub Spacer Steel U2140 MW315 14mm

Replacement freehub spacer for Vision hubs code U2140.

Hub End Cap: Vision DB QR NS XDR U5111 U5126 MW050

Replacement hub end caps for Vision NS Disc wheels. Compatible with hub codes: U5111 and U5126.

Hub End Cap: Vision X12 XDR U5140 MW135

Replacement hub end caps for Vision rear wheels with hub code U5140. For use with SRAM XDR.

FSA PRA MTB Hub End Caps

Vision TriMax 30 DB Rear Hub Centre Lock X12 28H U2092

Replacement rear hub for Vision TriMax 30 Disc rear wheel with Centre Lock rotor mounts.

Vision Spacer for Team 35 RB U2082 Rear Hub MW574

Replacement rear hub spacer for Vision Team 35 rim brake wheels.  

Vision Ratchet Ring Removal Tool for PRS Hub E0791

Ratchet ring removal tool for Vison wheels with PRS hubs.

Box Components XL Pro Lite Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Box Components XE Expert Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Features 7075-t6 aluminium standard 1” steerer tube to accommodate mid-sized racers Designed for 10mm axle conventional hubs Internal butterfly for added durability at steerer tube and fork crown interface Specifications Material Legs: Vacuum Mold High Modulus Unidirectional Carbon Fibre Material Steerer: Extruded & Butted 7075-T6 Aluminium Butterfly & Dropouts: Cold-Forged 6061-T6 Aluminium Hardware: Stem Lock Finish: Gloss Black/Matte Black with Water Decals Size: 20” or 24” Steerer: 1" Straight Offset: 32mm Axle: 10mm This model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminium steerer tube and 10mm cold-forged dropouts  

Box Components Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs

Surly Grappler Frameset - Blue

A Trail Bike Tailored for Drop Bars Off-road enthusiasts have been Frankensteining drop bars onto trail bikes for decades, so Surly designed the Grappler to scratch that itch with a little more precision. Engineered first and foremost around a stable and comfortable drop-bar hand position, its trail-ready geo provides a spirited ride on mixed terrain. Cleared for girthy tyres and decorated with an array of mounts for hauling your daily provisions and overnight gear, the Grappler is ready to take you and your paraphernalia down that overgrown fire road for an extrasensory experience. There's nothing to be afraid of. Probably.

Trek Fetch+ 2 Rigid Fork

Columbus Futura Cross+ Carbon Fork

Surly Grappler Frameset

Trek Emonda SL 700c Fork

Genuine replacement parts Get back on the road with a genuine replacement fork. Product details Original equipment replacement forks for Émonda SL bikes Color matched for direct compatibility Rim brake models use direct-mount brakes

Gates Belt Drive Cogs

Genuine replacement parts Gates SureFit system ensures exceptional hub engagement. Product details Stainless steel For use with IGH systems

DMR Swopout Dropout - mk1 - 12 mm Maxle Bosses

DMR Swopout Dropout - mk3 - 142 x 12mm

DMR Swopout Dropout - mk4 - 142 x 12mm - PLUS 8

DMR Rhythm - Dropout Geared 142mm

DMR Rhythm - Dropout SS QR

DMR Chain Tugs - 14mm - inc 10mm adp - Black

Kinesis 10mm Chain Tug

Trek Procaliber SL Frame Set Gen 1 2019

Bontrager Switch Lever Front Thru-Axle

Trek Roscoe 24" Kids bike Forks

Surly 12mm Dropout Adaptor

DMR V3 Swopout Dropout

Surly Straggler 650b Fork

Surly Ice Cream Truck 150 Fork

Surly Straggler 650b Frameset

Frameset Specification Tubing: 100% Surly proprietary 4130 CroMoly tubing. ED Coated. TIG-welded. Double-butted main triangle Rear Dropouts: Forward-exiting horizontal dropouts with adjusters give you singlespeed compatibility and wheelbase adjustability to help you fit the tyres and mudguards you want to run with that drivetrain you want to run. 135mm spacing Brake Compatibility: Disc Only. Max 160 mm Rotor Size Braze-ons/extras: Mudguard eyelets at the dropouts, front and rear rack bosses and dual water bottle mounts. Oh yeah, it sports downtube shifter mounts Seatpost diameter: 27.2mm Seatpost clamp diameter: 30.0mm (we include our Surly stainless clamp with our framesets) Headset/Steertube: 1-1/8˝ threadless Front Derailleur Clamp Diameter: 28.6 mm Bottom bracket shell: 68mm wide, standard English threaded 1.37 x 24t Chainring Clearance: Manipulated so you can fit pretty much whatever size rings you want. Go nuts Tyre Clearance: Our Fatties Fit Fine (FFF) stays and our beautiful slope-crowned custom fork provide room for tyres up to 650b x 42mm! With fenders! Fork: 4130 CroMoly, disc only, lugged and brazed. Sloping crown with threaded eyelets, tapered and butted curved blades with mid-blade rack eyelets, dual dropout eyelets Weight: 54cm = 4.74 lb (2.27kg) Fork--uncut = 2.3 lb (1050g) Wheel sizes: 650b/27.5" Colour: Black (Closet Black) or Purple (Glitter Dreams)

Identiti Rebate XL Fork

Identiti Rebate Jump Fork

DMR Swopout 10mm Horizontal Mk2 Dropout

DMR Swopout Horizontal Mk1.5 Dropout

DMR Swopout 12mm Bolt Through Mk1.5 Dropout

Identiti Rebate XL 1420 Fork - 1-1/8"

New XL Jump Rebates - designed for riders who have long travel suspension forks, and want to retain a closer geometry using a rigid set-up. (40mm longer - at 465mm Axle to Crown)The Task: To provide a version of the Identiti Rebate Jump fork for those riders with an existing 20mm T-axle front hub set-up.Identiti got to thinking and they figure the reason to have a 20mm T-axle set-up is to help tie the 2 wobbly ends of a suspension fork together (which, apparently, they do quite well). HOWEVER... the Rebate doesn't go up and down and therefore doesn't need any more lower leg rigidity than a conventional QR hub will give... because - erh - it's a flamin' RIGID FORK to start with!So... do Identiti need all manner of heavy dropouts together with fiddly and farty bolts onto the 20mm T-axle that make the fork heavy and make wheel removal a pain? ...Well, they don't think so... Plus, wouldn't it be handy if the finished fork and axle set-up could accept BMX pegs - if you want?Hence... the REBATE 1420 is supplied with a 20/14mm axle conversion system, and lightweight CNC relieved 14mm BMX style dropouts. This means that the REBATE 1420 will accept your regular 20mm T-axle hub and finishes with straight forward, nice and easy to use BMX style 14mm threaded axle and nuts. This is way way stronger than the bare minimum system that the Rebate needs, and way way lighter/faster to use than a normal 20mm T-axle set-up.An I.S, disc mount is welded on in case you need that disc brake, and of course, you can also retro-fit the Identiti V-adaptor brake pivots at 24 or 26" if you want. On top of all of this - you still get the Rebate Jump fork specifications of variable wall thickness heat treated CNC steerer and butted and spiral re-enforced legs... things that make the Identiti REBATE one of the strongest and lightest forks out there...

Identiti Rebate 1420 Fork

BMX style JUMP fork.The Task: To provide a version of the Identiti Rebate Jump fork for those riders with an existing 20mm T-axle front hub set-up.Premium 4130 Cr-mo Deep drop steerer crown allows shallow bend radius legs and large weld area for increased strength. Fluted and butted 31.8mm legs are both light and strong. The internally and externally machined steerer offers optimised strength and weight, without the stress rising areas that changes in diameter over short distances can cause. Super buff 6mm thick BMX style dropouts, CNC machined for light weight.  I.S. Disc mounts included. Short Suspension Corrected length provides crisp steering.The REBATE 1420 is supplied with a 20/14mm axle conversion system, and lightweight CNC relieved 14mm BMX style dropouts. This means that the REBATE 1420 will accept your regular 20mm T-axle hub and finishes with straight forward BMX style 14mm threaded Axle and nuts.Optional extra clamp-on V-pivot system for either 24 or 26".

Identiti S24 ADS Dropout - 10mm

Identiti S24 ADS Dropouts for current ADS Identiti frames.Innovative S-24 ADS option. This tweaked version of the ADS plates, effectively moves the rear axle forwards by a huge 35mm - giving a 26" wheel based frame effectively the same backend as a 24" specific frame, so, NOW you can truly experience 24" specific handling - without the limitation of having to stick with 24" wheels forever... No doubt... others will follow later as they have with our ADS concept...Features: CNC Alloy 6.5mm thick Black anodised Sold Each.

Identiti S24 ADS Dropout - 14mm

Identiti S24 ADS Dropouts for current ADS Identiti frames.Innovative S-24 ADS option. This tweaked version of the ADS plates, effectively moves the rear axle forwards by a huge 35mm - giving a 26" wheel based frame effectively the same backend as a 24" specific frame, so, NOW you can truly experience 24" specific handling - without the limitation of having to stick with 24" wheels forever... No doubt... others will follow later as they have with our ADS concept...Features: CNC Alloy 6.5mm thick Black anodised Sold Each

Identiti Jekyll/Hyde/666 ADS Dropout

Features: Identiti Alloy ADS Dropouts for current ADS Identiti frames CNC Alloy 6.5mm thick Black anodised Sold Each

Identiti Rohloff ADS Dropout

Rohloff Speedhub dropouts for current ADS Identiti frames.Tweaked version of the original ADS dropouts - with a reinforced longer Left hand jaw to accept Rohloff OEM axle plates and a neat non-hanger Right hand jaw. This set allows you to fit a Rohloff Speedhub in conjuction with Rohloff OEM axle plates - therefore avoiding the need to use Torque arms or Speed bones. Thus creating a VERY neat and economic Speedhub set-up. Rohloff ADS plates are compatible with all current Identiti ADS frames.

Surly Troll 26" Rigid Fork

The Troll fork is just like the one that comes on Surly's new Troll frame, a 26" wheeled fully geared utility bruiser and cruiser. The Troll fork replaces 100mm travel suspension forks. Like all Surly forks, it’s constructed of CroMoly steel and sports rim brake pivots (removable) as well as a 51mm disc caliper mount. Unlike Surly's other forks it’s designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade. Mudguard (fender) eyelets too. Steerer is 1-1/8" threadless. Finish is black powdercoat.

Salsa Alternator 1.0/2.0 UDH Plate Kit