Kinesis Range Plus Fork

Salsa Waxwing Carbon Fork

Merida Mission 10K Gravel Road Frame

Our new Mission truly embodies its ‘fast on any surface’ intentions. It's a gravel race bike that takes key geometry and frame elements from the Scultura Endurance and Silex and adds road racing DNA to deliver a fast and responsive ride on pretty much any surface. The Mission’s built-in storage compartment (G.U.T.) improves the accessibility and organisation of crucial mid-race nutrition and spares, further enhancing the efficiency when every second counts. The ability to seamlessly fit 1x or 2x drivetrains offers riders the flexibility to find their preferred set-up fo riding or racing.

Dt Swiss Rim Magnet Presta

Surly Disc Trucker 700c Frameset - Beige

Salsa Fargo Frameset

Salsa Fargo Ti Frameset

Salsa Journeyer Drop Bar Frameset

Surly Disc Trucker 26" Frameset - Beige

Campagnolo EPS Grommets

Cannondale SuperSix EVO Hi-MOD Frameset

Kinesis Fernweh Mountain Bike Frameset

Features Cold drawn seamless 3Al/2.5V titanium tubing and machined headtube, for ultimate strength and rider comfort. Optional Columbus Futura Adventure carbon fork. This new fork is fitted with a ‘flip-chip’ to allow adjustment of the rake of the fork between 45mm and 50mm. It has 110mm Boost spacing, internal dynamo and brake hose routing, cargo mounts and clearance for 29 x 3” tyres. Dropped, flat chainstay yoke gives rear end compliance and clearance for 29” Plus tyres. 148 x 12mm Boost rear axle spacing is compatible with most modern MTB wheelsets. Multiple bottle and luggage mounts ensure that you can carry all the gear you need. Dropper post compatible for when the terrain gets steep. GW Switch Lever Thru Axles: Clean and simple design with a removable lever. Colour laser etched graphics ensure your ride stays looking fresh throughout its life.

Mavic ID360 Grease

Mavic instant drive grease for ID360 freehubs pack of 10.

Mavic Tracomp Rings And Clips

Tracomp rings with clips for Mavic wheel hubs with Tracomp carbon spokes.  

Mavic Ratchet ID360 Kit

Mavic Ratchets for maintaining or updating your ID360 wheel mechanism. Suitable for all Mavic wheels with ID360 instant drive hubs.  

Mavic Adjustment System Kit QRM ID360

The Mavic Kit Adjust System QRM Auto ID360 is designed for use in Mavic rear wheels that feature the QRM Auto bearing setup.

Stans Nipple Washers (Shop Pack) 500pcs

This Shop pack is made for wheel builders who prefer the added piece of mind of building with nipple washers. Their stainless steel nipple washers increase the strength of the rim, while reducing friction at the nipple, to make wheel building easier. A nipple washer can be used with both brass and alloy spoke nipples. Nipple washers are not required for building with Stans rims.   Stainless construction adds durability and resists corrosion Adds rims strength and reduces friction with the nipple Designed to fit easily in spoke holes 500pcs for frequent wheel builds Nipple Washers (7.3mm OD)  

Stans #6900 Bearings 10x22x6mm

This #6900 sealed cartridge bearing measures 10x22x6mm and relies on stainless steel construction for smooth, long-lasting performance. Sold as a pair of two bearings.

Stans Axle - Neo / Neo ULT - REAR - 12x150/157

This rear axle fits Neo 12x150/157mm Boost hubs. This axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with Neo hubs. Not compatible with E-sync or M-pulse hubs.  

Stans Neo Freehub Spacer Kit Red

This spacer slides onto the axle before freehub installation on all Neo hubs. Red anodising makes it easier to locate if dropped.  

Stans Spacer Tube - Neo 6 bolt - FRONT - 9/15x100mm

This LTE spacer is a lightweight alternative to the comparable STD model. This replacement spacer sleeve for 100mm width 6-bolt Neo 15mm thru-axle and 9mm QR front hubs ensures perfect bearing alignment and keeps the axle centred on the bearing. Must be used with compatible bearings. Compatible only with #6902 bearings measuring 15x28x7mm. Not compatible with any Centerlock hub. Not compatible with M-pulse or E-sync hubs.  

Stans Spacer Tube - Neo / Neo ULT 6 bolt - REAR - 12x135/142mm

This lightweight spacer fits between the bearings of 6-bolt Neo 12x135 and 12x142mm rear hubs. Compatible only with Neo and Neo Ultimate 6-bolt hubs. Not compatible with any Centerlock hubs. Not compatible with E-sync or M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 15mm (E01 - E01)

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo Centrelock - FRONT - 12mm (E23 - E02)

This pair of front-end caps is designed to fit Centerlock E-sync hubs when used with 12mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits Centerlock E-sync, Neo, and Neo Ultimate front hubs. Compatible with forks that use a 12mm axle. Not compatible with 6-bolt or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.  

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm Thru Axle (E09 - E10)

These end caps fit 6-bolt E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm thru-axle hubs and Shimano HG or SRAM XD/XDR freehubs.

Stans End Caps - E-Sync OS/Neo OS - FRONT - QR (E07 - E07)

This pair of front-end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits 6-bolt E-sync OS and Neo OS hubs. Not compatible with Centerlock or non-OS versions of E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans Axle - E-Sync / Neo - REAR - 12x135/142 & Singlespeed

This steel rear axle provides maximum durability for E-sync and Neo 135mm, 142mm, and single-speed hubs. With only a 38g weight difference over our standard alloy axle, the steel axle features a high-precision centerless ground treatment that ensures perfect bearing fit. Compatible with E-sync and Neo 6-bolt and Centerlock hubs. Not compatible with 148mm or 157mm E-sync and Neo hubs. Not compatible with M-pulse hubs.

Stans E-Sync / Neo / Neo ULT 6 bolt - Conversion Kit for Front QR

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Also compatible with Neo and Neo Ultimate hubs. Not compatible with Centerlock hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.  

Mavic Kit ID360 Insert Lobe 2017

The latest generation of the ID360 Insert Lobe 2017

Hub End Cap: Vision DB TA12 Team 30/35/SC Front MW632

Replacement hub end caps for Vision Team 30 Disc, Team 35 Disc or SC front wheels.

Hub End Cap: Vision SH11 U2081 MW633

Replacement hub end caps for Vision hubs U2081

Vision Freehub Spacer Steel U2140 MW315 14mm

Replacement freehub spacer for Vision hubs code U2140.

Vision Team Clip-On Armrest Bolt Kit ML066H, MW225, ML436

Replacement armrest bolts for Vision Team Clip-On bars. Includes 16 & 12mm bolts, washers and nuts.

Hub End Cap: Vision DB QR NS XDR U5111 U5126 MW050

Replacement hub end caps for Vision NS Disc wheels. Compatible with hub codes: U5111 and U5126.

Vision TriMax 30 DB Rear Hub Centre Lock X12 28H U2092

Replacement rear hub for Vision TriMax 30 Disc rear wheel with Centre Lock rotor mounts.

Vision Spacer for Team 35 RB U2082 Rear Hub MW574

Replacement rear hub spacer for Vision Team 35 rim brake wheels.  

CeramicSpeed OSPW System Cerakote Coated Campag 12 spd Pulley Wheels

OSPW for Campagnolo 12-speed EPS Cerakote Limited Edition The OSPW System for Campagnolo 12-speed EPS comes with a compact moulded carbon fibre cage for light weight and durability. The system offers a three spring tension setting that allows for optimal setup based on riding conditions. Like every other CeramicSpeed Oversized Pulley Wheel System, this is developed, designed and handbuilt in Denmark. The product comes with unique ceramic coated pulleys in Pink and White Cerakoate with a lifetime warranty. The system is not compatible with 12-speed mechanical.  

Surly Disc Trucker 26" Frameset - Black

SRAM Axle Maxle Lite Front MTB Thru Axle

Surly Straggler 650b Frameset

Frameset Specification Tubing: 100% Surly proprietary 4130 CroMoly tubing. ED Coated. TIG-welded. Double-butted main triangle Rear Dropouts: Forward-exiting horizontal dropouts with adjusters give you singlespeed compatibility and wheelbase adjustability to help you fit the tyres and mudguards you want to run with that drivetrain you want to run. 135mm spacing Brake Compatibility: Disc Only. Max 160 mm Rotor Size Braze-ons/extras: Mudguard eyelets at the dropouts, front and rear rack bosses and dual water bottle mounts. Oh yeah, it sports downtube shifter mounts Seatpost diameter: 27.2mm Seatpost clamp diameter: 30.0mm (we include our Surly stainless clamp with our framesets) Headset/Steertube: 1-1/8˝ threadless Front Derailleur Clamp Diameter: 28.6 mm Bottom bracket shell: 68mm wide, standard English threaded 1.37 x 24t Chainring Clearance: Manipulated so you can fit pretty much whatever size rings you want. Go nuts Tyre Clearance: Our Fatties Fit Fine (FFF) stays and our beautiful slope-crowned custom fork provide room for tyres up to 650b x 42mm! With fenders! Fork: 4130 CroMoly, disc only, lugged and brazed. Sloping crown with threaded eyelets, tapered and butted curved blades with mid-blade rack eyelets, dual dropout eyelets Weight: 54cm = 4.74 lb (2.27kg) Fork--uncut = 2.3 lb (1050g) Wheel sizes: 650b/27.5" Colour: Black (Closet Black) or Purple (Glitter Dreams)

Wheels Manufacturing Dropout 65

Features: Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerances Stiffer than any original equipment hanger which improves shifting performance Still breaks before your frame does to perform its main function All hangers come with instructions and hardware Direct replacement for original equipment with guaranteed fit Black anodised for extra scratch and damage resistance Laser etched for easy part identification

Campagnolo Bottom Bracket Cable Guide (4 pcs)