Chainsets & Cranks from Triton Cycles

All Box One M35 cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we were obsessed with Power delivery AKA pedalling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. The Box One M35 crankset takes the oversized spindle action to an extreme with a colossal 35mm diameter cross-section courtesy of Praxis™. That dimension might seem massive, but we’ve also employed the use of cold-forged 7075 T6 aluminium. That's an alloy that delivers low mass but that also flirts with the toughness of steel. We then grind that spindle with the kind exactitude you’d expect from medical equipment. The very prominent crank arms are hollow-forged with much of the wall thicknesses pushed to high-stress zones. A stabilizer ring acts as an anti-twist brace between spider legs. A precision CNC-machined Chromoly/alloy self-extracting crank bolt system secures the package. Remember, you’ll need a modern frame to cope with this kind of technology.

Box Components Oversized M30-M Crankset

Thu, 16 Jul 2026 16:57:07 +0100

Box Components Oversized M30-M Crankset

All Box One and Two cranksets are engineered and crafted using our Oversized Technology. We all know there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. While creating our cranks, we were obsessed with Power delivery AKA pedalling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. The Box One M30 crankset is just as tyrannical as its big brother the Box One M35. Since it's designed for the smaller rider the now 30mm spindle is as extreme to a smaller rider as the 35mm is to a burly world champion. The crank arms are hollow-forged but reduced in size for their application. It is possible to add too much stiffness that the rider will not feel the benefit. Going beyond that point simply adds material which is surplus weight. We’ve removed the stabiliser rings from the spider and removed unneeded material from its legs. These cranks are engineered for the smaller-sized racer. IMPORTANT NOTES: BB86 frames require Praxis™ part 86-4001B or 86-4001W. BB30/PF30 frames require Praxis™ part 68-4001R or 68-5401R. T47 frames require Praxis™ part 47-0000. Do not use pedal washers when installing pedals onto these cranks. M30-M cranks were designed to be used without pedal washers

Praxis Works Girder G2 Carbon M30 Crank Arms

Fri, 10 Jul 2026 10:50:26 +0100

Praxis Works Girder G2 Carbon M30 Crank Arms