SEIDO Streak Stem

SEIDO Chase Stem

SEIDO Meander Stem

M-Wave Adjustable Quill Stem C2.2

M-Wave Adjustable Ahead Stem C2.1

Amplitude G100 Stem 6 Deg 31.8mm

FSA NS SMR-II Integrated Routing Alloy Road Stem O-Fork

DMR DefyDH 45mm Stem - 35mm

Bbb Actionstem Suspension Stem 10° 31.8Mm [Bhs-52]

Leatt Gravity Stem Dm 6.0 2025 Uni

Ritchey Stem Adaptor Shim

Ritchey Wcs Switch Stem

Ritchey Rl1 Switch Stem

Ritchey Comp Switch Stem

Truvativ Stem Descendant 35mm clamp 50mm, Direct Mount, Boxxer Grey 50MM

M Part Adjustable 4-bolt quill stem 1 inch 25.4

Cane Creek GXC Stem

Thomson Elite Stem X4 40mm

Deda Elementi Superbox DCR Stem

The evolution of the the famous Superzero stem that's designed to allow fully integrated cable routing when coupled with Deda handlebars featuring the DCR system (Deda's internal cable routing). The Superbox stem features a proprietary system that provides two possible mounting solutions for the internal cable routing:   Completely internal cable routing through bar/stem (DCR) Semi-internal cable routing through stem (S-DCR) DCR compatible handlebars: Superzero DCR for Road use, Gera DCR for Gravel and Alanera DCR for integrated bar and stem. Please note: If cables are being run in a DCR set up, it must be used with a 'D' shaped Steerer tube

Deda Elementi Zero100 Team Stem 70deg BoB

Team version of the famous Zero100 stem, with a 70 deg negative angle. For the most demanding riders looking for the perfect position on the bike.

FSA Omega Road Stem

3D forged and CNC machined from AL6061/T6. 4-bolt cold forged face plate. Chromoly hardware. ±6° x L60, 70, 80, 90, 100, 110, 120, 130mm. Ø31.8mm handlebar clamp diameter. 35mm fork clamp stack height. Bead blasted anodized black. Laser graphics. 127 grams (100mm).  

Box Components 22.2 X 1-1/8" Centre Clamp Stem

Box Two Centre clamp Hollow stems are cold forged from the highest quality 6061-T6 aluminium available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.  These stems come with either a 48 or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. This stem can be installed either side up to give a 5-degree rise or drop. Note: Not compatible with forks that have carbon fibre steerer tubes  

Box Components Stem Locks

Cold forged and fully CNC-machined from several high-strength aluminium alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube.   All new Box One™ Stem Locks are backwards compatible with existing Box forks and may work with forks from other manufacturers.  

Deda Elementi Zero100 Stem

Zero100 Stem The innovation of physical matter in a powerful design. The most advanced technology to offer the best combination of lightweight, strength and reliability. The first choice of the peloton. Finish: black on black (BOB) or black anodized with white logo Material: Alloy 2014 3D forged Handlebar Dia: 31,7mm Fork Steerer: 1" 1/8 (28,6mm) Clamp Height: 40mm Screws: CrMo Angle: 82deg Weight: 126g (110mm)

Deda Elementi Zero2 Stem

Zero2 Stems New 2-piece faceplate for the Deda Zero2 stem. It strikes the perfect balance between engineering and design. It's the only Deda Stem available in the extra short sizes starting from 50mm making it the ideal stem for any rider. Material: 3D forged alloy 6061 Angle: 83deg Diameter: 31.7mm Fork Steerer: 1 1/8" Weight: 140g (110mm)

Deda Elementi Vinci DCR Stem

Vinci DCR Stem The first Deda stem that's designed to allow fully integrated cable routing when assembled with other Deda handlebars featuring the all new DCR system (Deda Internal Cable Routing) The Vinci is the most versatile stem on the market being compatible with traditional 1-1/8" fork steerers as well as 1-1/4". The DCR system works with a standard tapered steerer with 1-1/8" upper diameter but requires a 52mm (1.5") upper headset bearing. The stem leaves room at the back for the cables to fit the gap in between the headset bearing and fork. The Vinci Stem system features special spacers that provide the channels for the housing cables. The Spacers are designed with slits that let them pull open, they can be added or removed to get the fit right without having to remove all the cables. The innovative 3D forging technology and the flat design result in a better aero performance. The aero integrated top cap, headset spacers and alloy sleeve adaptor for a 1-1/8" fork steerer complete the line of accessories included.

Deda Elementi Superzero Stem

Superzero Stem The new Superzero stem is the perfect combination of stiffness, lightness and aerodynamic shape. The stem has a trapezoid shape with a flattened top section for torsional stiffness and excellent aerodynamic performance. Designed for the most demanding riders, the stem is manufactured using an innovative 3D forging process with AL 2014 alloy. Fork Clamp Diameter: 28.6mm (1 1/8') Clamp Diameter: 31.7mm Material: AL2014 alloy Bolts: CrMo Steel Angle: 82 Weight: 140g (110mm)

Deda Elementi Superleggero Stem

Superleggero Stems With a new exclusive graphic design, the search for the ultimate functional shape, stripped of any excess. The lightest production stem. Alloy 7050 3D forged aluminium stem with titanium screws, available in black and black on black. Weight below 100 grams. Material: Alloy 7050 Screws: Titanium PVD Black Clamp diameter: 31,7mm Fork Steerer: 1 1/8" Angle: 82deg Weight: 115g (110mm) Finish: black anodized, polished on black

Deda Elementi Superzero RS Stem

Superzero RS Stem The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm.

Bbb BHS-09 - Rider 7deg 31.8mm Stem

Bbb BHS-09 - Rider 2.0 7deg 31.8mm Stem

Thomson Elite X4 Stem

Thomson Elite X4 1.5" Stem

Thomson Elite Direct Mount Stem

Deda Elementi Logo Black Stem 26.0

Deda Elementi Adj Adjustable Stem

Deda Elementi Zero100 Stem

Deda Elementi Superleggero RS Stem

Deda Elementi Spada Quill Stem Adapter

Gusset Staff Stem

Stocky, superlight do it all ahead type stems.   Light enough for XC or Road, burly enough for Freeride.   The 3D Forged 6061 T6 hollow alloy construction body provides a structurally superior item, allowing it to be both strong and light.   The 'Flip-flop' design 5-degree angle allows the Staff Stem to be used either way up to deliver a rise or fall for the handlebar height.   4 x Cro-Mo M5 bolts on the faceplate clamp securely hold the handlebars.   Twin opposing M6 bolts on the steerer clamp are optimised to hold the fork.   

Cinelli Pista Stem

AL 6061 T6 Aluminium alloy forged with the 3D system and oriented fibres, it has been developed with the typical 65 track angle to satisfy the most demanding trackies.