SEIDO Streak Stem

SEIDO Chase Stem

SEIDO Meander Stem

Raceface Turbine Stem

#html-body [data-pb-style=RV1PC95]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}CNC-machined 6000-series aluminiumOptimised 35mm clamp interfaceeMTB ready

Box Components Box One Oversized 31.8 X 1-1/8" Top Load Stem

FSA NS SMR-II Integrated Routing Alloy Road Stem O-Fork

Basso Paradigma -8 degree Stem Matt

Basso Diamante/Venta R -11 Degree Stem

Basso Diamante/Venta R -11 Degree Stem

Basso Diamante/Venta R -11 Degree Stem

Basso Diamante/Venta R -11 Degree Stem

PRO VIBE Alloy -17degree 31.8mm Handlebar Stem

PRO VIBE Alloy -10degree 31.8mm Handlebar Stem

Race Face Aeffect R Stem

FSA NS SMR Integrated Routing Alloy Stem

Smart Cable Routing (SMR) 3D forged and CNC machined AL6061 Alloy faceplate Chromoly hardware -6° × 90, 100, 110, 120 & 130mm Fine blasted anodized black Weight: 235g

FSA Omega Road Stem

3D forged and CNC machined from AL6061/T6. 4-bolt cold forged face plate. Chromoly hardware. ±6° x L60, 70, 80, 90, 100, 110, 120, 130mm. Ø31.8mm handlebar clamp diameter. 35mm fork clamp stack height. Bead blasted anodized black. Laser graphics. 127 grams (100mm).  

Box Components 22.2 X 1-1/8" Top Load Stem

The Box Two Top Load is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength

Box Components 22.2 X 1" Top Load Stem

The Box Two Top Load Stem is a modern 1-inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. The top load stem is designed for easy of handlebar installation while maintaining superior strength.

Box Components 22.2 X 1-1/8" Front Load Stem

The Box Two front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium.The front-load clamp is designed to fight pull-up forces while offering superior strength. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.  

Box Components 22.2 X 1-1/8" Centre Clamp Stem

Box Two Centre clamp Hollow stems are cold forged from the highest quality 6061-T6 aluminium available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.  These stems come with either a 48 or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. This stem can be installed either side up to give a 5-degree rise or drop. Note: Not compatible with forks that have carbon fibre steerer tubes  

Box Components Oversized 31.8 X 1-1/8" Top Load Stem

All Box One top load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector, we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars, we have contributed to increased pedalling stiffness by providing a backstop to the 'lifting' phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. This particular model stem not only shifts material from low-stress zones to the Oversized interface but also provides rigidity through the side skirt design. Using a reverse development process for the delta stem, the structure was created from the outside-in vs. the traditional inside-out method. These stems are engineered for larger-sized, stronger racers.

Box Components Oversized 31.8 X 1-1/8" Front Load Stem

All Box One front load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness.   As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.   This particular model stem not only shifts material from low-stress zones to the Oversized interface but also provides rigidity through the side skirt design. Using a reverse development process for the delta stem, the structure was created from the outside-in vs. the traditional inside-out method. These stems are engineered for larger-sized, stronger racers. This stem can be installed either side up to give a 5-degree rise or drop.

Box Components Oversized 31.8 X 1-1/8" Delta Stem

All Box Delta stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. Moving material from low-stress areas has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Industry Nine Nine A318 Handlebar Stem

Industry Nine’s A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminium billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, I9 continue our proud tradition of offering riders uncompromising components.

Industry Nine A35 Stem

Industry Nine’s A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminium billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, I9 continue our proud tradition of offering riders uncompromising components. Taking name and shape from the A-axis in our five-axis machining centers, the A35 and A318 are destined for your favourite all-mountain rides. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars. Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates.

Tifosi Uno Stem

Uno Alloy Stem Tifosi brings you Uno - their quality, cost effective component range. The anodised black finish with smart, polish on black graphics means this bar can easily be matched to any road bike. Its single piece face plate design offers quick and easy installation, and the understated look of this stem is completed by the black bolts. With sizes ranging from 80mm to 120mm in length, you'll be able to dial in your perfect fit. Complete the look by choosing the matching Tifosi Uno handlebar and seatpost.

Deda Elementi Zero100 Stem

Zero100 Stem The innovation of physical matter in a powerful design. The most advanced technology to offer the best combination of lightweight, strength and reliability. The first choice of the peloton. Finish: black on black (BOB) or black anodized with white logo Material: Alloy 2014 3D forged Handlebar Dia: 31,7mm Fork Steerer: 1" 1/8 (28,6mm) Clamp Height: 40mm Screws: CrMo Angle: 82deg Weight: 126g (110mm)

Deda Elementi Superleggero Stem

Superleggero Stems With a new exclusive graphic design, the search for the ultimate functional shape, stripped of any excess. The lightest production stem. Alloy 7050 3D forged aluminium stem with titanium screws, available in black and black on black. Weight below 100 grams. Material: Alloy 7050 Screws: Titanium PVD Black Clamp diameter: 31,7mm Fork Steerer: 1 1/8" Angle: 82deg Weight: 115g (110mm) Finish: black anodized, polished on black

Whisky No. 7 Stem

Deda Elementi Zero100 Stem

Dia Compe ENE Hole-In Road Quill Stem

Cinelli Ant Stem

Renthal Apex Stem

Genetic Juzzi 2-Axis Adjustable Stem

Gusset Staff Stem

Stocky, superlight do it all ahead type stems.   Light enough for XC or Road, burly enough for Freeride.   The 3D Forged 6061 T6 hollow alloy construction body provides a structurally superior item, allowing it to be both strong and light.   The 'Flip-flop' design 5-degree angle allows the Staff Stem to be used either way up to deliver a rise or fall for the handlebar height.   4 x Cro-Mo M5 bolts on the faceplate clamp securely hold the handlebars.   Twin opposing M6 bolts on the steerer clamp are optimised to hold the fork.   

Cinelli Pista Stem

AL 6061 T6 Aluminium alloy forged with the 3D system and oriented fibres, it has been developed with the typical 65 track angle to satisfy the most demanding trackies.

Cinelli 1A Quill 26.0 Stem

Cinelli A1 Quill Stem: Probably the best-selling quill stem in the history of biking, certainly the most imitated, returns nearly identical to the original with micro thickness changes that allows it to satisfy the latest European standards.The anodized finish is the mythical "Milky". Good-to-use, beautiful to see and touch: Multi-sensorial Classic Design.

Cinelli Vai Stem

Specifications: Clamp diameter: 31,8 mm Clamp diameter: 28,6 mm (1-1/8") Stem angle: 84deg/96deg Material: Forged in Aluminium alloy 6061 T6 Finishing: Matt black anodized Bolts: Front M5 - Rear M6 Sizes: 90-100-110-120mm Weight: 175 g/110 mm