Deda Elementi Superbox DCR Stem

The evolution of the the famous Superzero stem that's designed to allow fully integrated cable routing when coupled with Deda handlebars featuring the DCR system (Deda's internal cable routing). The Superbox stem features a proprietary system that provides two possible mounting solutions for the internal cable routing:   Completely internal cable routing through bar/stem (DCR) Semi-internal cable routing through stem (S-DCR) DCR compatible handlebars: Superzero DCR for Road use, Gera DCR for Gravel and Alanera DCR for integrated bar and stem. Please note: If cables are being run in a DCR set up, it must be used with a 'D' shaped Steerer tube

Deda Elementi Zero100 Team Stem 70deg BoB

Team version of the famous Zero100 stem, with a 70 deg negative angle. For the most demanding riders looking for the perfect position on the bike.

FSA NS SMR Integrated Routing Alloy Stem

Smart Cable Routing (SMR) 3D forged and CNC machined AL6061 Alloy faceplate Chromoly hardware -6° × 90, 100, 110, 120 & 130mm Fine blasted anodized black Weight: 235g

FSA Omega Road Stem

3D forged and CNC machined from AL6061/T6. 4-bolt cold forged face plate. Chromoly hardware. ±6° x L60, 70, 80, 90, 100, 110, 120, 130mm. Ø31.8mm handlebar clamp diameter. 35mm fork clamp stack height. Bead blasted anodized black. Laser graphics. 127 grams (100mm).  

Box Components Hex Lab Oversized 28.6 X 1" Front Load Stem

All Box One front load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Features:   Lightweight 3D Hollow Design Front-Load Clamp Design to Fight Pull-Up Forces Large Bar Bore Large Hollow Clamping Bolts Superior Strength

Box Components Oversized 31.8 X 1-1/8" Top Load Stem

All Box One top load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector, we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars, we have contributed to increased pedalling stiffness by providing a backstop to the 'lifting' phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. This particular model stem not only shifts material from low-stress zones to the Oversized interface but also provides rigidity through the side skirt design. Using a reverse development process for the delta stem, the structure was created from the outside-in vs. the traditional inside-out method. These stems are engineered for larger-sized, stronger racers.

Box Components Oversized 31.8 X 1-1/8" Front Load Stem

All Box One front load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness.   As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.   This particular model stem not only shifts material from low-stress zones to the Oversized interface but also provides rigidity through the side skirt design. Using a reverse development process for the delta stem, the structure was created from the outside-in vs. the traditional inside-out method. These stems are engineered for larger-sized, stronger racers. This stem can be installed either side up to give a 5-degree rise or drop.

Box Components Oversized 31.8 X 1-1/8" Delta Stem

All Box Delta stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. Moving material from low-stress areas has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Deda Elementi Zero100 Stem

Zero100 Stem The innovation of physical matter in a powerful design. The most advanced technology to offer the best combination of lightweight, strength and reliability. The first choice of the peloton. Finish: black on black (BOB) or black anodized with white logo Material: Alloy 2014 3D forged Handlebar Dia: 31,7mm Fork Steerer: 1" 1/8 (28,6mm) Clamp Height: 40mm Screws: CrMo Angle: 82deg Weight: 126g (110mm)

Deda Elementi Zero2 Stem

Zero2 Stems New 2-piece faceplate for the Deda Zero2 stem. It strikes the perfect balance between engineering and design. It's the only Deda Stem available in the extra short sizes starting from 50mm making it the ideal stem for any rider. Material: 3D forged alloy 6061 Angle: 83deg Diameter: 31.7mm Fork Steerer: 1 1/8" Weight: 140g (110mm)

Deda Elementi Vinci DCR Stem

Vinci DCR Stem The first Deda stem that's designed to allow fully integrated cable routing when assembled with other Deda handlebars featuring the all new DCR system (Deda Internal Cable Routing) The Vinci is the most versatile stem on the market being compatible with traditional 1-1/8" fork steerers as well as 1-1/4". The DCR system works with a standard tapered steerer with 1-1/8" upper diameter but requires a 52mm (1.5") upper headset bearing. The stem leaves room at the back for the cables to fit the gap in between the headset bearing and fork. The Vinci Stem system features special spacers that provide the channels for the housing cables. The Spacers are designed with slits that let them pull open, they can be added or removed to get the fit right without having to remove all the cables. The innovative 3D forging technology and the flat design result in a better aero performance. The aero integrated top cap, headset spacers and alloy sleeve adaptor for a 1-1/8" fork steerer complete the line of accessories included.

Deda Elementi Zero 17deg Riser Stem

Zero 17deg Riser Stem The Zero Stem model is made from 3D forged 6061 aluminium with a 17deg positive angle for a small rise and a comfortable position. The stem features a 4-bolt faceplate for extra strength, ISO4210 approved. Material: 3D Forged 6061 Aluminium Angle: 107deg (+17deg) Handlebar dia: 31.7mm Weight: 145g (110mm)

Deda Elementi Superzero Stem

Superzero Stem The new Superzero stem is the perfect combination of stiffness, lightness and aerodynamic shape. The stem has a trapezoid shape with a flattened top section for torsional stiffness and excellent aerodynamic performance. Designed for the most demanding riders, the stem is manufactured using an innovative 3D forging process with AL 2014 alloy. Fork Clamp Diameter: 28.6mm (1 1/8') Clamp Diameter: 31.7mm Material: AL2014 alloy Bolts: CrMo Steel Angle: 82 Weight: 140g (110mm)

Deda Elementi Superzero RS Stem

Superzero RS Stem The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm.

Deda Elementi DI2 Clip for Superzero Stems

DI2 Clip for Superzero Stems This innovative new DI2-Clip is a specific accessory for Deda's stunning new stem that offers a clean, smart and easy to use solution to help make Shimano's DI2 system a more integrated experience. No tools or straps are required to install the clip thanks to the simple plug-in system that has been used. Made from a thermoplastic material for lightness and durability. This only fits the Deda Superzero Stem Tech Specs Compatible with Deda Superzero Stems only Material: Thermoplastic material Handlebar Diameter: 31.7mm Finish: Black Weight: 7g

PRO VIBE Carbon Stem - 31.8mm, 1-1/8"

Redshift Shockstop Suspension Stem - 30deg

Deda Elementi Zero Stem

Deda Elementi Logo Black Stem 26.0

Deda Elementi Zero1 Stem

Deda Elementi Murex Quill Stem

Deda Elementi Adj Adjustable Stem

Deda Elementi Zero100 Stem

Deda Elementi Superleggero RS Stem

Renthal Integra 35 DM Stem

Bontrager Race Lite 4-Bolt Stem

Cinelli Ant Stem

Renthal Apex Stem

Cinelli Pista Stem

AL 6061 T6 Aluminium alloy forged with the 3D system and oriented fibres, it has been developed with the typical 65 track angle to satisfy the most demanding trackies.

Renthal DUO MTB Stem

Cinelli Vai Stem

Specifications: Clamp diameter: 31,8 mm Clamp diameter: 28,6 mm (1-1/8") Stem angle: 84deg/96deg Material: Forged in Aluminium alloy 6061 T6 Finishing: Matt black anodized Bolts: Front M5 - Rear M6 Sizes: 90-100-110-120mm Weight: 175 g/110 mm