Deda Elementi Vinci/Vinci DCR Accessories

Deda Elementi Microshims

Deda Elementi Headset Spare Parts Box

Deda Elementi Headset Topcover

Deda Elementi Jet Two Kit for Colnago TT1

Deda Elementi Compression Rings for Headsets

Deda Elementi DCR Integrated Headset

Deda Elementi Deda DCR/S-DCR Headset Spares

Deda Elementi Alanera and Superbox Top Cap For D Shaped Fork Steerer 1 1/8

Deda Elementi Alanera DCR and Superbox V1 Headset Spacer Adapters

Deda Elementi Alanera RS DCR Spacers

Deda Elementi Alanera RS Top Cover

Deda Elementi Alanera RS/Superbox V2 DCR Headset Spacer Adapters

Deda Elementi S-DCR Headset External Routing

S-DCR Headset External Routing Specially designed headset for partially external cable routing. This headset allows cables to exit the handlebar then into the frame via a gap in this headset. Technical Specification: Model: Integrated 1.5" – 1.5" Bearing Type: Chrome Steel angular contact bearing Bearing size: 51.9mm x 40mm x 8mm (upper) / 51.9mm x 40mm x 8mm (lower) Contact Angle: 45 degrees x 45 degrees Headtube: 56mm diameter Fork Steerer: Tapered 1 1/8" to 1.5" Top Cover: 56mm diameter Crown Race: 39.8mm diameter, aluminium Stack Height: 16mm Cable Routing: Compatible with 4 cables, Deda HSS spacers are recommended Weight: 90g

Deda Elementi HSS 46 Alloy Headset Spacers (Pack of 3)

HSS 46 Headset Spacers New exclusive graphics and finish of Deda HSS Spacers. The innovative Deda HSS headset stack spacer system allows you to install spacers directly under the top cover, unlike traditional systems. This new system provides a much sleeker look to the bike and cockpit by making it look a lot more flush and in-line with the rest of the bike. The Deda HSS system results in a much more efficient integration of the spacers with the frame increasing stiffness and bike handling at the same time. Material: Available in Alloy and Carbon For 46mm dia steerer Tubes Sizes: Available in 3mm / 5mm / 10mm Finish: Black anodised / Carbon UD Compatible with 1 1/8 fork steerers only

Deda Elementi IN-4 1 1/4" HSS Alloy Integrated Headset

IN-4 1 1/4" HSS Alloy Integrated Headset IN -4 Integrated headset for 1 1/8 - 1 1/4 tapered road or MTB forks with superior ACB stainless steel bearings. Available in alloy or carbon top cap. Compatible with innovative Deda H.S.S. system (Headset Stack Spacers) that allows to mount spacers directly over the headtube. Additional Info Headset Model: integrated 1 1/8-1 1/4 Bearings Type: angular contact bearing; stainless steel Bearings Size: upper 41.8x30.5x8mm; lower 46.9x34.1x7mm Contact angle: 45deg x 45deg Headtube: tapered 46.0mm upper; 52.0mm lower Fork steerer: tapered 1 1/8 - 1 1/4 Top cover: 46mm; aluminium (IN-4A) Crown race: 33.0mm aluminium Stack height: 9.6mm (8.8 + 0.8) Weight: 73g Info: Compatible with headset stack spacer system Deda H.S.S

Deda Elementi 1-1/8" Expander Bung

Deda Elementi Expander Bungs Expandable plug. Machined aluminium alloy. Internal dia: 23.6 - 24.1 1" 1/8 diameter. Weight: 32g (DZE)

Deda Elementi 1 1/8" Carbon Headset Spacer

1 1/8" Carbon Headset Spacers Deda Carbon Headset Spacers. Made in a high modulus carbon fibre. For 1 1/8" Steerer (OSD 28,6mm) Outside: 34mm Inside: 28,6mm Thickness 3, 5, 10, 15, 20mm Price of 1 piece

Deda Elementi DCR Integrated Headset

DCR Integrated Headset New integrated headset for DCR (Deda internal cable routing) system and compatible with Vinci stem. It allows the full integration of the cables through the headset bearing. The DCR system works with a standard tapered fork steerer (1-1/8” – 1.5”), But requires a 52mm (1.5”) upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork. A dedicated topcover for alanera is available as accessory. Tech Specs Headset Model: Integrated 1.5"-1.5" Bearings: Angular contact bearing chrome steel Headtube: 56mm Top Cover: 56mm Crown Race: 39.8mm Alloy Stack Height: 9.6mm Weight: 76g Notes: compatible with 56mm Dia frame headtube designed for 1.5” bearings (upper & lower). The DCR topcover for alanera is included with the handlebar kit.

Deda Elementi 1 1/8" Alloy Headset Spacer

1 1/8" Alloy Headset Spacers METAL Head spacers. For 1 1/8" headset (fork steerer outside 28,6mm) Outside: 34mm Inside: 28,6mm Thickness: 3-5-10mm Price for 1 piece

Deda Elementi 1 1/8" Carbon Headset Spacers (Pack of 10)

1 1/8" Carbon Headset Spacers Deda Carbon Headset Spacers. Made in a high modulus carbon fibre. For 1 1/8" Steerer (OSD 28,6mm) Outside: 34mm Inside: 28,6mm Thickness 3, 5, 10, 15, 20mm

Deda Elementi 1 1/8" Alloy Headset Spacers (Pack of 10)

1 1/8" Alloy Headset Spacers METAL Head spacers. For 1 1/8" headset (fork steerer outside 28,6mm) Outside: 34mm Inside: 28,6mm Thickness: 3-5-10mm

Deda Elementi IN-4 1 1/4" HSS Integrated Headset