Components from Triton Cycles

Road and MTB quick release featuring a composite lever and Mavic's exclusive cam system. Sturdy and tight, it allows effortless wheel fixing. Please review the Mavic Technical Page to make sure you are ordering the correct part for your wheel.

Mavic Allroad SL Disc Wheel

Fri, 09 Oct 2026 13:38:02 +0100

Mavic Allroad SL Disc Wheel

Gravel, dirt, teeth-chattering cobbles, ride it all with confidence, in control, on this lightweight and responsive wheel. Featuring a new wider fully airtight UST tubeless rim to accommodate wider tyres. The Allroad SL is the pinnacle of efficiency, ride quality and speed on the roughest roads, the loosest gravel tracks and all paths that lead to them. Thanks to its 25mm wide UST hookless rims, this wheel offers a smooth ride with a wide range of matching tubeless tyres, from 30mm to 64mm. Ride smoother and faster on rough roads, gravel and dirt 25mm wide hookless UST rims for a smooth ride with a wide range of tubeless tyres from 30mm-64mm UST Road Tubeless lets you run lower tire pressure for comfort and control on rough roads No tubes means less friction, better efficiency and grip, and pinch-flat protection Patented aero spokes improves ride quality and speed Superlight, durable and easy to use and maintain ISM4D rim saves weight where it matters while protecting durability Black Shield rim finish offers 2 times stronger protection against rock impacts and scratches Fore drilling makes the rim fully airtight without the need for a rim tape saving 30gs per wheel ID360 freewheel is low and easy maintenance and automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer Oversize axles and bearings offers greater lateral stiffness D360 freewheel technology is 12mm compatible, convertible to quick release

Mavic Allroad S Disc Wheel

Fri, 09 Oct 2026 13:38:02 +0100

Mavic Allroad S Disc Wheel

Adventure cyclists looking to take their gravel riding to the next level will find their match with Mavic's Allroad S wheels. With their cutting-edge technology and signature Mavic design, these lightweight, durable wheels are ideal for tackling all types of terrain, from rough gravel roads to windy singletrack, and everything in between. Trusted Mavic technologies and design, all packaged in a lightweight, durable UST Allroad wheelset with a stunning finish and a wide 25mm rim make this a smart upgrade for adventurous riders. Ride smoother and faster on rough roads, gravel and dirt 25mm wide hookless UST rims for a smooth ride with a wide range of tubeless tyres from 30mm-64mm UST Road Tubeless lets you run lower tyre pressure for comfort and control on rough roads No tubes means less friction, better efficiency and grip, and pinch-flat protection Patented aero spokes improves ride quality and speed Lightweight and durable Lightweight, flat spokes and ID360 freewheel technology for reliable lightweight performance Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling makes the rim fully airtight without the need for a rim tape Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer Oversize axles and bearings offers greater lateral stiffness ID360 freewheel technology is 12mm compatible, convertible to quick release

Campagnolo EPS Super Record 12x Rear Mech

Fri, 09 Oct 2026 13:38:02 +0100

Campagnolo EPS Super Record 12x Rear Mech

Super Record EPS 12x Rear Mech In the same way as the front, the rear derailleur also exploits many developments achieved for its mechanical 12x predecessor. The same 45Degree trajectory angle corresponds to a new change of position that electronically improves chain engagement, specific for each sprocket. Better power transmission and less wear and tear of consumer transmission components are just two of the advantages of the positioning of this new rear derailleur with respect to the cassette. Compatible with the 11-29 and 11-32 cassettes, the two jockey wheels have a 12-tooth design and the 72.5mm derailleur cage ensures perfect performance. The slimmer, sturdier structure of the resilient derailleur cage gives more space between the derailleur and the spokes, making it easier to adjust. Moving the chain onto 12 sprockets in the cassette calls for greater precision, given the increased number of chainrings in the same space. The firmware not only manages this task efficiently and quickly, but the front and rear actuators do their job using the most powerful motors available on the market. Built with materials such as aluminium, ultra-light techno-polymer and long-fibre carbon, the EPS rear derailleur has been built to meet Campagnolo standards in terms of extreme durability, precision and reliability, despite weighing only 234g.

Connex Link - 11 speed

Tue, 11 Aug 2026 09:53:02 +0100

Connex Link - 11 speed

11-speed Quick Release chain joining link Engineered by Wippermann, the unique Connex Link locking system for a chain joining link has been proven over and over. Precision made in Germany using high-grade heat-treated steel. Tool-free operation allows quick and simple use by hand. Re-usable design allows user to join and split chains multiple times. The Connex Link is especially useful for enabling regular chain cleaning and lubrication operations, as well as gear system maintenance and repairs when out riding. Connex Link QRs are supplied as standard with all Connex Derailleur chains and are available in 12, 11, 10, 9 and 8-speed versions.

Stans E-Sync / Neo / Neo ULT Centrelock - Conversion Kit for Front QR

Sat, 27 Jun 2026 17:56:34 +0100

Stans E-Sync / Neo / Neo ULT Centrelock - Conversion Kit for Front QR

This kit converts your Centerlock E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminium quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. It is also compatible with Neo and Neo Ultimate hubs. Not compatible with 6-bolt hubs, Boost 110mm hubs, or OS hubs. Not compatible with M-pulse hubs.

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - QR (E04 - E04)

Sat, 27 Jun 2026 17:56:34 +0100

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - QR (E04 - E04)

This pair of front-end caps is designed to fit 6-bolt E-sync hubs when used with 9mm quick-release axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. These end caps are compatible with both Boost 110mm and older 100mm axle spacing. Fits 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with Centerlock or OS versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm QR (E11 - E12)

Sat, 27 Jun 2026 17:56:34 +0100

Stans End Caps - E-Sync/Neo 6 bolt - REAR - 10x135mm QR (E11 - E12)

These end caps fit 6-bolt E-sync hubs with 10x135mm quick-release rear axle spacing and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo, and Neo Ultimate 6-bolt 10x135mm quick-release hubs and Shimano HG or SRAM XD/XDR freehubs. Not compatible with any Centerlock hubs. Not compatible with 142mm, 148mm, 157mm, or single-speed E-sync and Neo hubs. Not compatible with Shimano Micro Spline hubs. Not compatible with M-pulse hubs.

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 9mm Thru Axle

Sat, 27 Jun 2026 17:56:34 +0100

Stans End Caps - E-Sync/Neo 6 bolt - FRONT - 9mm Thru Axle

Through-bolt systems with 9mm axles are uncommon compared to 15mm thru-axle and classic 9mm quick-release systems, but we do offer end caps for this system. This pair of front-end caps is designed to fit 6-bolt E-sync hubs when used with 9mm thru-axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Fits rare 9mm thru-axle systems with 6-bolt E-sync, Neo, and Neo Ultimate front hubs. Not compatible with 15mm, 12mm, or 9mm quick-release systems, and not compatible with OS and Centerlock versions of E-sync, Neo, or Neo Ultimate hubs. Not compatible with M-pulse hubs.

Box Components Quick Release Seat Clamp

Thu, 13 Aug 2026 19:33:37 +0100

Box Components Quick Release Seat Clamp

Box Two™ Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminium alloy. Weighing in at just 28 grams/ 0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards

Box Components Quick Release Seat Clamp

Wed, 23 Sep 2026 17:02:06 +0100

Box Components Quick Release Seat Clamp

Box One Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminium alloy. A quick-release lever makes adjusting your seat height quick and easy. Weighing just 28 grams/1 ounces in the 31.8 sizes, it’s as lightweight as it is tough. The head of the quick-release lever and the face of the clamp are given a proprietary zero friction” surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Available in 31.8 in anodized red, blue, silver, and black clamps with black levers and gold pivots, laser-etched graphics, and titanium hardware.

Miche XM45 29" Disc Wheelset SRAM XD

Fri, 10 Jul 2026 15:17:57 +0100

Miche XM45 29" Disc Wheelset SRAM XD

XM45 29" Disc Wheels The XM45 Wheelset is the perfect entry-level wheelset or a great back up wheelset for when you're in need of a spare wheel. It has a 23c section rim with a convertible UST reinforcing sleeve for mounting tubeless ready tyres. The aluminium hubs are light and efficient and run on ultra-smooth bearings, to make sure you're riding as quick as possible. Miche proudly use Sapim spokes on their wheels due to the strength and reliability that Sapim are known for. The XM45 wheelset uses stainless steel J-Bend spokes and lace them so they're optimised for each wheel size, meaning that whichever size you buy, you'll get one tailor built specifically for that size. The front hub comes with 9mm QR adaptors fitted, remove the adaptors for use with a 15mm Bolt-Thru system.

Miche DX 142mm Rear Bolt Thru Axle PRE 2020

Fri, 09 Oct 2026 13:38:02 +0100

Miche DX 142mm Rear Bolt Thru Axle PRE 2020

Miche Disc Wheel Adaptors Miche have always been known for their "Made In Italy" quality products and their hubs are loved by wheelbuilders all over the world. These disc wheel spares can be used on a number of Miche DX (disc) hubs.