Hayes Dominion T2 Brake Kit

The best just got better. The limited-edition Hayes Dominion T2 packs the power, sensitivity, and reliability the Dominion family is known for into its lightest chassis yet. Featuring a Reynolds designed and in-house produced carbon-fibre lever, titanium hardware, composite reservoir cover, pads with aluminium backing plates, and precise weight-reducing machining, the T2 is 50g lighter per brake (254g) than the Dominion A2.

Granite JUICY NIPPLE Valve cap & Removal Tool Inc. Valve Stem

Granite JUICY NIPPLE is a valve cap with extra function! You can use it to remove/install valve core in order to top up tire sealant, anytime anywhere. JUICY NIPPLE comes 7 different colorways. You can choose a pair of caps only or with two black alloy valve stems in 45mm length. Colour: Black, Red, Blue, Green, Orange, Pink, Gold Weight: 2.5g (caps in pair) / 10g (caps with 45mm valves in pair)

Bbb CableCap Kit

Aluminium ferrule kit anodized in your favourite colour! Kit includes all ferrules for a single bike 6×5mm sealed end caps. 10×4mm sealed end caps. 2×1.6mmcable tips. 2×1.2mm cable tips.

Renthal Revo-F Pedals

With Ride-Tuned external features and patent pending internals, the Revo-F is the new flat pedal of choice. Featuring a two-axis concave pedal body, fully useable pedal platform and a pin system for fine-tuning grip levels, the Revo-F offers unrivalled on-trail performance. The Revo-F spins on an extra wide Igus bush and three cartridge bearings, with the internals fully sealed from the elements. Patent pending internals allow easy home maintenance, using standard tools. The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on-trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability. Features: RIDE-TUNED Fully concave platform, in two axis, to give the highest level of support and control. The deep concave profile is achieved whilst still retaining a thin outer depth of just 18mm.In addition to this, asymmetric pin positioning and an increased width axle makes the full platform and all ten pins useable, for all shoe sizes. TUNEABLE GRIP Revo-F pedals come factory-fitted with ten 5.5mm height pins per side. Supplied with the pedals are a further forty pins and forty washers. Using a combination of these, the pin height can be adjusted from 5.5mm to either 4.5mm, 3.5mm or 2.5mm, making them one of the most tuneable pedals available. Additionally, all the pins are screw-through type, so can be easily removed if damaged through impact. UNIQUE AXLE SYSTEM The patent pending axle system, featured in the Revo-F allows full home servicing, using standard tools, found in anyone’s toolkit. All is required is a 6mm and 8mm hex-key, a standard 8mm socket, a torque wrench and a mallet.The unique system uses the axle to both remove and re-install the bushing. The bearings are also pressed into place, using the pedal internals. DURABLE INTERNALS Inboard, the Revo-F spins on an extra-wide Igus bush, sealed with a full-contact wiper seal. Outboard there are three cartridge bearings. Two smaller bearings and a larger bearing in the outermost location, sealed with an end-cap O-ring.Adding to the durability of the bearings is the full-length axle. Mounting the bearing at the outer edge of the pedal gives them the best support, to protect them from damage in a rock-strike incident. FORGED AND CNC The main body of the Revo-F is made from forged 6061 aluminium. The pedal is then fully CNC machined, to remove as much material as possible. To improve rock strike performance, the front face of the pedal has been kept smooth, without any cut-outs. This allows the pedal to slide over rocks, rather than grabbing them.Internally the pedal body spins smoothly around a high-grade, forged, machined and precision-ground chromoly axle.  

Bbb BBO-91 - ShimSet (24mm spacer kit for removing side play)

Granite PITA Pedal Cover

Granite JUICY NIPPLE Valve Cap & Removal Tool

Granite JUICY NIPPLE Valve cap & Removal Tool Inc. Valve Stem

Halo MT Supadrive SS Rear Hub

TRP Dash Carbon Hydraulic Disc Brake Kit

Introducing the Dash and Dash Carbon, the highly anticipated hydraulic disc brakes from TRP. Three years in the making, Dash and Dash Carbon represent a new level in disc brake performance. Both models feature radial mount master cylinders: forged one-piece alloy calipers and tool free reach adjust. The Dash Carbon features a new power adjust dial that allows the rider to custom tune braking performance.Optimising front and rear balance and brake feel for a variety of trail conditions.

PRO Gap Cap Alloy - 1 1/8

PRO Handlebar End Plug