Renthal 1XR 4-Arm 104BCD Chainring

The Renthal 1XR chainring tooth profiling ensures the highest level of chain retention, in all conditions. Alternating width teeth interlock with the chain for ultimate security, with no loss of efficiency. Intricate tooth profiling increases mud clearance and extends longevity. The Renthal 1XR offers ultimate chain retention performance and market leading durability. Wide Narrow Alternating 1.8 / 3.5mm teeth interlock, in sequence, with the inner and outer links of 9, 10, 11 or 12 speed chain, to give the highest levels of chain retention and efficiency. The tall, square tooth profile ensures the very high level of chain retention isn't reduced as the tooth face wears.   All Weather Mud grooves, located in each tooth bed combined with ample clearance below the outer chain plates, allows dirt and mud to be purged clear of the drivetrain, improving performance and durability. High Strength A CAD I-Beam cross section is utilised to give the maximum strength and stiffness, with the lowest possible weight. CNC Machined The 1XR is fully CNC machined from 7075 T6 aluminium alloy. Utilising CNC machining production allows accurate tooth face profiling and the maximum width contact area with the chain rollers, for greater longevity. Ultra Durable After CNC machining, the 1XR chainring is hard anodised to give an incredibly durable surface finish. The chainring is further enhanced with the application of a 3-D graphic in a CNC machined recess.  

SRAM X-SYNC Road Chainring 107BCD

SRAM Force Chainring 2x12 Speed BCD107 33/35T

SRAM Chain Ring Road 107Bcd 2X12 Force With Cover Plate

Renthal 1XR 4-Arm 94BCD Chainring

Praxis Works MTB 1x 104BCD Wave Tech Chainring

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.Features: Installs on 4-arm 104BCD MTB crank RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2 In very rough terrain, or just for pure security, Praxis Works still recommend use of an upper guide

FSA Stamped MTB S9 Chainring