FSA Bosch E-Bike G1/2 Sprocket

Heat treated stainless steel Heat treated chromoly chainring 14T, 15T, 16T, 17T, 18T, 19T, 20T Polished Silver or Black

Miche Sprocket Lockring

Miche Sprocket Lockring Special chrome-plated steel sprocket lockring. This is the correct track lockring for Miche and other European track hubs that use a different size lockring (33.6 x 24tpi) to other standard track hubs. This is a L/H thread lockring to secure a track cog on a track hub. Special chrome-plated

Miche E-Bike Bosch Motor Sprocket

E-Bike Bosch Motor Sprockets Heat treated special steel sprocket to fit E-Bikes with a Bosch Motor.

Miche 1/8" Integrated Fixed Sprockets

1/8" Integrated Fixed Sprockets Threaded track sprockets made from Opaque chrome-plated steel. Sprocket Material: Opaque Chrome-Plated Steel Teeth: 13 - 14 - 15 - 16 - 18 Compatibility: 1/8" Weight: 26g (13t)

Miche 1/8 Fixed Sprockets with Carrier

1/8 Fixed Sprockets with Carrier Miche's unique system allows for a fast change of sprocket ratios. The splined adaptor screws onto the hub just like a normal cog, then simply slide the sprocket onto the carrier. Then both carrier and sprocket are held in place with the lockring. To change the ratio, simply undo the lockring and remove the sprocket. Slide on a different tooth size and refit the lockring. Because of the smaller diameter of a 13t sprocket, the actual sprocket is threaded and cannot be run with carrier. Made from Opaque chrome-plated steel Carrier is not supplied with MS16K, MS17K & MS18K Lockring sold separately

Kmc Bosch Compatible Front Sprocket

Rohloff Speedhub Sprocket Tool

Rohloff Speedhub Splined Sprocket

Rohloff Replacement Sprocket carrier

Sunrace MZ90 12-Speed 11-50t

Sturmey Archer RX Sprockets

Shimano Sprocket For Nexus Geared Hubs

Gusset Single Speed Cassette Sprocket

Gusset DoubleSix SS Sprocket

Shimano CS-S500 Alfine Single Sprocket with Chain Guide

Eclat CNC Tilt Sprocket

Wethepeople Supreme CNC 25T Sprocket 2011

Surly Cassette Cogs

Shimano compatible Spline fitting.9 Speed spaced, these cogs can be run 9speed or less, together with Shimano 9Spd gear shifter systems. Note: Teeth profiles are straight forward, making them ideal for Single Speed applications, however, with no twists or ramps etc, the gear shifting will not be as slick as with regular Shimano cogs when used in a multiple cog line-up.The large foot print caused by built-in spacing at the base of these machined cogs gives a larger foothold on the cassette body, making these a premium selection for Single Speed or multi-speed use with reduced risk of torque transfer damage to the cassette hub body. (Note: This point is especially important with Alloy or Ti Cassette bodies.)