Icetoolz X-Type Tyre Pliers

Icetoolz Chainring mounting tool, STePS + FSA Ring E6100, E7000, E8000, EP8

Chainring mounting tool for Shimano STePS systems. Fits E6100/E7000/E8000/EP8. 1mm narrower than M581 for use with FSA chainrings.

Icetoolz Direct Mount Chainring Lock Ring Tool

Compatible for SHIMANO® 12 speed chainring lock ring: XTR FC-M9100, FC-M9120, XT FC-M8120, FC-M8130, SLX FC-M7100, FC-M7120, FC-M7130, DEORE FC-M6100-1, Use with 32mm Wrench or 11C1  

Icetoolz Dual Function Tyre Lever & Installation Tool

Icetoolz Ocarina Torque Wrench

IceToolz Ocarina torque wrench 3 – 10Nm With the IceToolz torque wrench it is possible to tighten nuts with the correct torque. Easy analog adjustment from 3Nm to 10Nm. This torque wrench has a bit connection and 5 bits are coupled (3mm, 4mm, 5mm, 6mm and Torx T25) The IceToolz article number of this torque wrench is E219. IceToolz Ocarina torque wrench up to 10Nm for the fine work For fine work, this torque wrench is adjustable from 3Nm to 10Nm. By turning the steel of this moment, the correct moment can be set down to the Newton meter. The fine scale is clearly legible on the handle of the torque wrench. On the passenger bit connection the supplied bits, but of course also other bits. The supplied bits are well incorporated and can be pressed out with the exchange.  A torque wrench is a wrench with which you can preset the maximum amount of force that can be applied. More and more often a certain moment of force is stated for parts on a bicycle (for example 4-5Nm). Then the product is suitable to be tightened by force. This is difficult to estimate, but the IceToolz torque wrench is a torque wrench that helps. By pre-setting, in this case 5Nm, the object can be tightened with the torque wrench until the torque wrench clicks and does not tighten any further. One is assured of a correct way of fastening with the IceToolz torque wrench.

Icetoolz Shuriken Disc Mount Facing Tool