Renthal 1XR 4-Arm 104BCD Chainring

The Renthal 1XR chainring tooth profiling ensures the highest level of chain retention, in all conditions. Alternating width teeth interlock with the chain for ultimate security, with no loss of efficiency. Intricate tooth profiling increases mud clearance and extends longevity. The Renthal 1XR offers ultimate chain retention performance and market leading durability. Wide Narrow Alternating 1.8 / 3.5mm teeth interlock, in sequence, with the inner and outer links of 9, 10, 11 or 12 speed chain, to give the highest levels of chain retention and efficiency. The tall, square tooth profile ensures the very high level of chain retention isn't reduced as the tooth face wears.   All Weather Mud grooves, located in each tooth bed combined with ample clearance below the outer chain plates, allows dirt and mud to be purged clear of the drivetrain, improving performance and durability. High Strength A CAD I-Beam cross section is utilised to give the maximum strength and stiffness, with the lowest possible weight. CNC Machined The 1XR is fully CNC machined from 7075 T6 aluminium alloy. Utilising CNC machining production allows accurate tooth face profiling and the maximum width contact area with the chain rollers, for greater longevity. Ultra Durable After CNC machining, the 1XR chainring is hard anodised to give an incredibly durable surface finish. The chainring is further enhanced with the application of a 3-D graphic in a CNC machined recess.  

Renthal Revo-F Pedals

With Ride-Tuned external features and patent pending internals, the Revo-F is the new flat pedal of choice. Featuring a two-axis concave pedal body, fully useable pedal platform and a pin system for fine-tuning grip levels, the Revo-F offers unrivalled on-trail performance. The Revo-F spins on an extra wide Igus bush and three cartridge bearings, with the internals fully sealed from the elements. Patent pending internals allow easy home maintenance, using standard tools. The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on-trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability. Features: RIDE-TUNED Fully concave platform, in two axis, to give the highest level of support and control. The deep concave profile is achieved whilst still retaining a thin outer depth of just 18mm.In addition to this, asymmetric pin positioning and an increased width axle makes the full platform and all ten pins useable, for all shoe sizes. TUNEABLE GRIP Revo-F pedals come factory-fitted with ten 5.5mm height pins per side. Supplied with the pedals are a further forty pins and forty washers. Using a combination of these, the pin height can be adjusted from 5.5mm to either 4.5mm, 3.5mm or 2.5mm, making them one of the most tuneable pedals available. Additionally, all the pins are screw-through type, so can be easily removed if damaged through impact. UNIQUE AXLE SYSTEM The patent pending axle system, featured in the Revo-F allows full home servicing, using standard tools, found in anyone’s toolkit. All is required is a 6mm and 8mm hex-key, a standard 8mm socket, a torque wrench and a mallet.The unique system uses the axle to both remove and re-install the bushing. The bearings are also pressed into place, using the pedal internals. DURABLE INTERNALS Inboard, the Revo-F spins on an extra-wide Igus bush, sealed with a full-contact wiper seal. Outboard there are three cartridge bearings. Two smaller bearings and a larger bearing in the outermost location, sealed with an end-cap O-ring.Adding to the durability of the bearings is the full-length axle. Mounting the bearing at the outer edge of the pedal gives them the best support, to protect them from damage in a rock-strike incident. FORGED AND CNC The main body of the Revo-F is made from forged 6061 aluminium. The pedal is then fully CNC machined, to remove as much material as possible. To improve rock strike performance, the front face of the pedal has been kept smooth, without any cut-outs. This allows the pedal to slide over rocks, rather than grabbing them.Internally the pedal body spins smoothly around a high-grade, forged, machined and precision-ground chromoly axle.  

Renthal 1XR 4-Arm 96BCD Chainring

Renthal 1XR 4-Arm 96BCD Chainring

Renthal 1XR 4-Arm 94BCD Chainring

Renthal Traction Lock-On Grips

Renthal Ultra Tacky Push On Grips

Renthal Ultralite 1XR 4-Arm Chainring

Ultimate chain retention. All conditions.Features: Alternating 1.8 / 3.5mm width teeth.  CNC machined 7075 T6 Aluminum. Hard anodised surface finish Mud grooves in the tooth bed Ultra stiff I-Beam cross section Mud clearance and wear-proof profiling 104mm BCD. Sizes: 32, 34, 36 and 38t Weight: 32t - 42g, 34t - 46g, 36t - 50g, 38t - 54g

Renthal Apex Stem

Renthal Push On BMX Grips

Renthal BMX grips are available in four advanced synthetic rubber compounds to give you the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. The dual stage pattern has been chosen to offer maximum grip performance while still retaining rider feel.

Renthal Lock On Handlebar Grips

The handlebar grip is your key contact point for controlling your bike. Having a grip suited to your individual demands is hugely important and often overlooked. Renthal developed their Lock-On grip with four unique compounds to give the rider the widest range of choice for any grip. Renthal Kevlar grips feature their most advanced compound to date. Millions of randomly aligned Kevlar particles are suspended in the base material. As the grip is used, more of these particles are exposed, resisting wear whilst retaining a soft and tacky feel.  This is their ultimate grip compound. Renthal developed an all new Super Comfort compound for the Lock-On grip. This is aimed at riders whose main criteria for a grip is the softest possible feel. Their grips feature CNC machined aluminium collars which are permanently integrated into the central core. This eliminates any movement between these sections which can develop over time.