Box Components Hex Lab Oversized X6 Pro Carbon Forks - 24"

Box Components Box One 20mm Adjustable Axle

Box Components Box Two 20mm Front Hub

Box Components Box One Oversized X2 Pro Carbon Forks

Box Components Box One X4 Pro Carbon Forks - 20"

Box Components Box One X4 Pro Carbon Forks - 24"

Box Components BOX ONE Oversized X6 Pro Carbon Forks - 24"

Box Components Box One XE Expert Carbon Forks

Box Components Hex Lab X6 Pro Carbon Forks

Box Components Hex Lab Carbon Rim - 24"

All Hex Lab rims are engineered to be front and rear specific and crafted using Oversized Technology. Box have carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedalling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track. The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fiber (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.

Box Components Hex Lab Carbon Rim - 20 x 1-1/8

All Hex Lab rims are engineered to be front and rear specific and crafted using Oversized Technology. Box have carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedalling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track. The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fibre (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.

Box Components Hex Lab Carbon Rim - 20"

All Hex Lab rims are engineered to be front and rear specific and crafted using Oversized Technology. Box have carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedalling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track. The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fibre (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.

Box Components One 20mm Adjustable Thru Axle

The Box One 20mm Adjustable Axle offers unparalleled versatility, having one size fitting all 20mm through hubs from 103 to 130mm, allowing it to fit seamlessly into your BMX racing setup. With its adjustable feature, you can fine-tune the axle to fit your frame and fork, ensuring optimal compatibility and maximising your efficiency on the track. No need to carry multiple axles or worry about finding the right fit—this axle is designed to cater to your racing needs. Crafted with durability in mind, this axle is built to withstand the rigours of intense racing, providing you with the confidence to push your limits.

Box Components Stem Spacers

Extruded and CNC-machined from 6061-T6 aluminium, Box One Stem Spacers feature an ultra-minimalist design that is super lightweight. Weights range from 0.02 to 0.14 ounces (0.56 to 4 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 mm. Available in anodized red, blue, and black to fit 1-1/8" forks. For the best performance, stack the spacers so the vertical supports are in alignment.  

Box Components Two Stem Spacers

Box Two Stem Spacers Extruded and CNC-machined from 6061-T6 aluminium, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimetres.

Box Components Carbon 1-1/8 Inch Integrated Headset

There is more to our carbon headsets than their striking good looks. From top to bottom, Box One™ Carbon Headsets was designed to perform. Each unit features a custom CNC-machined aluminium compression cap in the shape of the Box logo with cut-outs to reduce weight. At the centre of the compression cap is an anodized aluminium bolt that threads into a gold anodized aluminium expander plug. This expander eliminates the need for a star nut and works with all 1-1/8-inch steerer tubes—even carbon fibre steerer tubes. The bearing cover is crafted from carbon fibre, which not only adds style but helps shave weight. And at the heart of the headset are two super-smooth, titanium-nitride coated, sealed, 45×45 bearings. The titanium coating results in a low friction coefficient, increased corrosion resistance, and smoother rolling bearings. A split crown race makes installation and removal from forks super easy.

Box Components Oversized Carbon Tapered Headset

There is more to Box carbon headsets than their striking good looks. From top to bottom, the Box One™ Carbon Tapered Headset was designed to perform.Each unit features a custom CNC-machined aluminium compression cap in the shape of the Box logo with cut-outs to reduce weight.At the centre of the top cap is an anodized aluminium bolt that threads into a gold anodized aluminium expander plug. This expander eliminates the need for a star nut and works with all 1-1/8-inch steerer tubes—even carbon fibre steerer tubes.The top bearing cover is crafted from carbon fibre, which adds style and shave weight.At the heart of the headset are two super-smooth, titanium-nitride coated, sealed, 45×45 bearings. The titanium coating results in a low friction coefficient, increased corrosion resistance, and smoother rolling bearings.A split crown race makes installation and removal from forks super easy. Box 1.5-inch headsets are intended for tapered frames and forks and include an adapter crown race that allows you to run a fork with a straight 1-1/8-inch steerer tube.  

Box Components 22.2 X 1-1/8" Centre Clamp Stem

Box Two Centre clamp Hollow stems are cold forged from the highest quality 6061-T6 aluminium available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.  These stems come with either a 48 or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. This stem can be installed either side up to give a 5-degree rise or drop. Note: Not compatible with forks that have carbon fibre steerer tubes  

Box Components XL Pro Lite Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Box Components XE Expert Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Features 7075-t6 aluminium standard 1” steerer tube to accommodate mid-sized racers Designed for 10mm axle conventional hubs Internal butterfly for added durability at steerer tube and fork crown interface Specifications Material Legs: Vacuum Mold High Modulus Unidirectional Carbon Fibre Material Steerer: Extruded & Butted 7075-T6 Aluminium Butterfly & Dropouts: Cold-Forged 6061-T6 Aluminium Hardware: Stem Lock Finish: Gloss Black/Matte Black with Water Decals Size: 20” or 24” Steerer: 1" Straight Offset: 32mm Axle: 10mm This model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminium steerer tube and 10mm cold-forged dropouts  

Box Components Stem Locks

Cold forged and fully CNC-machined from several high-strength aluminium alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube.   All new Box One™ Stem Locks are backwards compatible with existing Box forks and may work with forks from other manufacturers.  

Box Components Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs

Box Components One Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs Size: 20-10mm

Box Components Cro-Mo Chainring Bolts

Box One™ Chainring Bolt 15 piece kit include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts so they will fit just about any chainring/crank combination, including chainrings and cranks with threaded holes. Includes Slotted Female Bolts Ease of Installation  

Box Components Alloy Chainring Bolts

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes. Rear bolts are slotted for ease of installation. 

Box Components Two Alloy Linear Cable

Box Two Linear Cable Want the best combination of braking power and cable strength? Box Two™ Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires. The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race-specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps.

Box Components Alloy Linear Cable

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fibre-wrapped aluminium/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminium Kollars™ ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars™ ferrules and one colour-matched and one black alloy cable end cap.  

Box Components Two Brake Post Extenders

Box Two™ Brake Post Extenders are the perfect solution for those riders needing extra brake pad adjustment without switching frame sizes. CNC-machined from 6061-T6 aluminium, Box Two™ Brake Post Extenders easily mount to any frame's existing cantilever brake bosses. They provide an additional 16 mm of brake arm positioning. Typically, they are most useful when a rider transitions from one wheel size to the next (i.e., 451 to 406). Depending on your application, they can be mounted in either one of two positions - above the frame's v-brake mounts or below.