Box Components Hex Lab Oversized X6 Pro Carbon Forks - 24"

Box Components Box One Oversized X2 Pro Carbon Forks

Box Components Box One X4 Pro Carbon Forks - 20"

Box Components Box One X4 Pro Carbon Forks - 24"

Box Components BOX ONE Oversized X6 Pro Carbon Forks - 24"

Box Components Box One XE Expert Carbon Forks

Box Components Hex Lab X6 Pro Carbon Forks

Box Components Side Number Plate

The Box Two Side Number Plates are shaped from embossed foam and feature full-colour printed graphics.

Box Components Stem Spacers

Extruded and CNC-machined from 6061-T6 aluminium, Box One Stem Spacers feature an ultra-minimalist design that is super lightweight. Weights range from 0.02 to 0.14 ounces (0.56 to 4 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 mm. Available in anodized red, blue, and black to fit 1-1/8" forks. For the best performance, stack the spacers so the vertical supports are in alignment.  

Box Components Two Stem Spacers

Box Two Stem Spacers Extruded and CNC-machined from 6061-T6 aluminium, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimetres.

Box Components Oversized Carbon Tapered Headset

There is more to Box carbon headsets than their striking good looks. From top to bottom, the Box One™ Carbon Tapered Headset was designed to perform.Each unit features a custom CNC-machined aluminium compression cap in the shape of the Box logo with cut-outs to reduce weight.At the centre of the top cap is an anodized aluminium bolt that threads into a gold anodized aluminium expander plug. This expander eliminates the need for a star nut and works with all 1-1/8-inch steerer tubes—even carbon fibre steerer tubes.The top bearing cover is crafted from carbon fibre, which adds style and shave weight.At the heart of the headset are two super-smooth, titanium-nitride coated, sealed, 45×45 bearings. The titanium coating results in a low friction coefficient, increased corrosion resistance, and smoother rolling bearings.A split crown race makes installation and removal from forks super easy. Box 1.5-inch headsets are intended for tapered frames and forks and include an adapter crown race that allows you to run a fork with a straight 1-1/8-inch steerer tube.  

Box Components XL Pro Lite Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Box Components XE Expert Carbon Forks

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Features 7075-t6 aluminium standard 1” steerer tube to accommodate mid-sized racers Designed for 10mm axle conventional hubs Internal butterfly for added durability at steerer tube and fork crown interface Specifications Material Legs: Vacuum Mold High Modulus Unidirectional Carbon Fibre Material Steerer: Extruded & Butted 7075-T6 Aluminium Butterfly & Dropouts: Cold-Forged 6061-T6 Aluminium Hardware: Stem Lock Finish: Gloss Black/Matte Black with Water Decals Size: 20” or 24” Steerer: 1" Straight Offset: 32mm Axle: 10mm This model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminium steerer tube and 10mm cold-forged dropouts  

Box Components Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs

Box Components One Fork Adaptors

Alloy Adaptors - Allows 20mm forks to run 10mm/1/3/8" front hubs Size: 20-10mm

Box Components Cro-Mo Chainring Bolts

Box One™ Chainring Bolt 15 piece kit include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts so they will fit just about any chainring/crank combination, including chainrings and cranks with threaded holes. Includes Slotted Female Bolts Ease of Installation  

Box Components Alloy Chainring Bolts

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes. Rear bolts are slotted for ease of installation. 

Box Components One Oversized M35 Crankset

All Box One M35 cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we were obsessed with Power delivery AKA pedalling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. The Box One M35 crankset takes the oversized spindle action to an extreme with a colossal 35mm diameter cross-section courtesy of Praxis™. That dimension might seem massive, but we’ve also employed the use of cold-forged 7075 T6 aluminium. That's an alloy that delivers low mass but that also flirts with the toughness of steel. We then grind that spindle with the kind exactitude you’d expect from medical equipment. The very prominent crank arms are hollow-forged with much of the wall thicknesses pushed to high-stress zones. A stabilizer ring acts as an anti-twist brace between spider legs. A precision CNC-machined Chromoly/alloy self-extracting crank bolt system secures the package. Remember, you’ll need a modern frame to cope with this kind of technology.  

Box Components Oversized M30-M Crankset

All Box One and Two cranksets are engineered and crafted using our Oversized Technology. We all know there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. While creating our cranks, we were obsessed with Power delivery AKA pedalling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. The Box One M30 crankset is just as tyrannical as its big brother the Box One M35. Since it's designed for the smaller rider the now 30mm spindle is as extreme to a smaller rider as the 35mm is to a burly world champion. The crank arms are hollow-forged but reduced in size for their application. It is possible to add too much stiffness that the rider will not feel the benefit. Going beyond that point simply adds material which is surplus weight. We’ve removed the stabiliser rings from the spider and removed unneeded material from its legs. These cranks are engineered for the smaller-sized racer. IMPORTANT NOTES: BB86 frames require Praxis™ part 86-4001B or 86-4001W. BB30/PF30 frames require Praxis™ part 68-4001R or 68-5401R. T47 frames require Praxis™ part 47-0000. Do not use pedal washers when installing pedals onto these cranks. M30-M cranks were designed to be used without pedal washers  

Box Components Two Chain Tensioners

Box Two™ Chain Tensioners let you dial in your chain tension, so it's just right. Two mounting holes provide room for ample adjustment on most frames. When used correctly, Box Two™ Chain Tensioners help protect frame dropouts and keep your rear wheels locked in place where they should be  

Box Components Chain Tensioner

Box One™ Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox.   Sold as pair 

Box Components Two Alloy Linear Cable

Box Two Linear Cable Want the best combination of braking power and cable strength? Box Two™ Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires. The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race-specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps.

Box Components Alloy Linear Cable

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fibre-wrapped aluminium/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminium Kollars™ ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars™ ferrules and one colour-matched and one black alloy cable end cap.  

Box Components Two Brake Post Extenders

Box Two™ Brake Post Extenders are the perfect solution for those riders needing extra brake pad adjustment without switching frame sizes. CNC-machined from 6061-T6 aluminium, Box Two™ Brake Post Extenders easily mount to any frame's existing cantilever brake bosses. They provide an additional 16 mm of brake arm positioning. Typically, they are most useful when a rider transitions from one wheel size to the next (i.e., 451 to 406). Depending on your application, they can be mounted in either one of two positions - above the frame's v-brake mounts or below.  

Box Components One BMX Sliding Disc Brake Adapter

The Box One Disc Brake Adapter is designed to improve braking control on frames where disc brakes were not standard. Compatible with 2 types of dropouts and 3-10mm hubs, the Box Disc Brake Adapter goes over your hub’s axle and mates with the frame’s dropout in the right configurations allowing mounting of a standard post mount disc brake calliper.

Box Components Two BB Set 24mm

Box Two™ 24mm External bottom brackets feature cold-forged, CNC-machined alloy cups, dual-labyrinth bearing covers, and precision-sealed bearings. They are the perfect match to Box Three™ and Four ™ cranks, and the ultimate upgrade to the budget BBs sold with most cranksets. Box Two™, 24mm External Bottom Brackets, are designed to fit all 24-millimetre crank spindles and frames with 68 or 73 x BC 1.37-inch BSA threaded bottom bracket shells.