CeramicSpeed from Triton Cycles

UFO Factory Optimized KMC 11S Chain Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark. This ultrafast chain has been optimised for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2-5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab. Maintenance of UFO Factory Optimized KMC 11S Chain Within 650 km/400 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected. In the case of light showers, we recommend applying UFO Drip Chain Coating. Allow the UFO Drip Chain Coating to dry off before riding. In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance. After 650 km/400 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 650 km/400 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 650 km/400 miles interval and decrease slightly after the UFO treatment wears off.

CeramicSpeed OSPW System Cerakote Coated Campag 12 spd Pulley Wheels

Wed, 23 Sep 2026 19:32:19 +0100

CeramicSpeed OSPW System Cerakote Coated Campag 12 spd Pulley Wheels

OSPW for Campagnolo 12-speed EPS Cerakote Limited Edition The OSPW System for Campagnolo 12-speed EPS comes with a compact moulded carbon fibre cage for light weight and durability. The system offers a three spring tension setting that allows for optimal setup based on riding conditions. Like every other CeramicSpeed Oversized Pulley Wheel System, this is developed, designed and handbuilt in Denmark. The product comes with unique ceramic coated pulleys in Pink and White Cerakoate with a lifetime warranty. The system is not compatible with 12-speed mechanical.

CeramicSpeed OHD SLT Headset Bearing SS 1.1/4" 35 x 47 x 7mm 36/45°

Thu, 08 Oct 2026 19:24:33 +0100

CeramicSpeed OHD SLT Headset Bearing SS 1.1/4" 35 x 47 x 7mm 36/45°

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty.

CeramicSpeed BB86/92 DUB Service Kit

Mon, 12 Oct 2026 19:17:10 +0100

CeramicSpeed BB86/92 DUB Service Kit

Riders with the new PF4130 design can use this kit to install a DUB crank. It is important to note that the inner race must be recessed roughly 2.8mm to provide clearance for the dust cover. this is the key change on the new PF4130 that began shipping in 2018. if the inner race (and seal) are flush with the outer race the Bottom Bracket cannot be converted for use with DUB cranks. Crank Compatibility: SRAM DUB Frame/Cup: BB86

CeramicSpeed OHD SLT Headset Bearing Kit Colnago G3X

Tue, 07 Apr 2026 17:01:59 +0100

CeramicSpeed OHD SLT Headset Bearing Kit Colnago G3X

CeramicSpeed OHD SLT Headset Bearing Kit Specialized Aetheos, Crux

Wed, 23 Sep 2026 19:32:19 +0100

CeramicSpeed OHD SLT Headset Bearing Kit Specialized Aetheos, Crux

he CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty. For more information about CeramicSpeed SLT bearings click here This kit contains 1 x 111820 and 1 x 111890 bearings.

CeramicSpeed Headset Bearings for Specialized Headset 5 Shiv Tri

Tue, 07 Apr 2026 17:01:59 +0100

CeramicSpeed Headset Bearings for Specialized Headset 5 Shiv Tri

CeramicSpeed headset bearings will take your handling of your bike to new levels, our bearings are built by hand in Denmark to ensure the highest performance and longevity. Specialized Headset 5 comes in two variants, with our CeramicSpeed Standard Bearings and with out Coated Bearings.The Coated Bearings offer an even longer lifetime and lower friction. Learn more about the coated advantage here