CeramicSpeed UFO Microfibre Towel Black

CeramicSpeed UFO Wax Speed Bag

CeramicSpeed UFO Wax Speed Kit

CeramicSpeed UFO Hot Wax Chain Hanger

CeramicSpeed UFO Clean Bike Wash

CeramicSpeed UFO Clean Drivetrain Chain Cleaner

CeramicSpeed UFO Drip All Conditions Chain Treatment

CeramicSpeed UFO Drip Indoor Conditions Chain Treatment

CeramicSpeed UFO Drip Wet Conditions Chain Treatment

CeramicSpeed UFO Tech All Round Bearing Grease

CeramicSpeed UFO Tech Bearing Cleaner

CeramicSpeed UFO Tech Long Life Bearing Grease

CeramicSpeed UFO Pulley Wheel Oil

CeramicSpeed UFO Race Day Bearing Grease

CeramicSpeed UFO Wax Ultra Endurance Kit

CeramicSpeed UFO Wax Ultra Endurance Bag

CeramicSpeed UFO Bike Wash Brush

CeramicSpeed UFO Drivetrain Care Bundle

CeramicSpeed UFO Ultimate Bike Care Bundle

CeramicSpeed UFO Speed Chain SRAM 12S Flattop

CeramicSpeed UFO Ultra Endurance Chain Shimano 12S

CeramicSpeed UFO Bearings Cleaner

CeramicSpeed UFO Factory Optimized Shimano 12S Chain No Teflon

Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark.This ultrafast chain has been optimised for Shimano 12-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2-5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab.

CeramicSpeed Wheel Bearing Press Tool Kit

Hidden CeramicSpeed bearing inside tool head for smooth function and reduced effort. Innovative Quick Release mechanism in tool head saves time. Premium steel punch included for hub designs incompatible with overcup extraction methods. Nesting drift design compatible with captive axel and removeable axel hubs. End-cap removal tool to aid removal of pressfit end caps that may become stuck or difficult to remove. Developed and designed in Denmark.

CeramicSpeed UFO Factory Optimized KMC 12S Chain

UFO Factory Optimized KMC 12S Chain Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. In The Box 126 link Optimized Chain. Quick Link. Disposable Gloves. Sticker Sheet. Single-use UFO Drip Sample.

CeramicSpeed UFO Factory Optimized KMC 11S Chain

UFO Factory Optimized KMC 11S Chain Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark. This ultrafast chain has been optimised for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2-5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab. Maintenance of UFO Factory Optimized KMC 11S Chain Within 650 km/400 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected. In the case of light showers, we recommend applying UFO Drip Chain Coating. Allow the UFO Drip Chain Coating to dry off before riding. In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance. After 650 km/400 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 650 km/400 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 650 km/400 miles interval and decrease slightly after the UFO treatment wears off.

CeramicSpeed UFO Wet Weather Essentials Bundle

The UFO Wet Weather Essentials Bundle is tailored to riders who consistently ride in wet conditions or off the tarmac. Keep your drivetrain optimized and protected in the most challenging terrains and conditions.   Show your bike how much you care!  

CeramicSpeed UFO Bearings Race Day Grease

UFO Bearings Race Day Grease Is designed to deliver as low friction as possible, thanks to the Dynamic Viscosity Transformation (DVT) technology that applies as a foamy grease and changes to a lubricating oil film under pressure. 30ml.

CeramicSpeed BSA T45 and T4786 30mm Service Kit

Crank Compatibility: 30m Frame/cup: BSA30. T45 (Colnago). T47-86mm. In the box: 2 bearing seals. 2 bearing dust covers. 1 x O-ring. 2 x 1mm spacers. 2 x 0,5mm spacer. 5ml CeramicSpeed All Round Grease.  

CeramicSpeed Threaded, and PF46mm Cup Shimano Service Kit

Crank Compatibility: Shimano / 24mm spindle Frame/cup: PF30. PF30a. BBright. EVO386. BSA. ITA. T45. T47-68mm. T47-86mm.

CeramicSpeed ITA for DUB Service Kit

Frame/cup: ITA In the box: 2 bearing seals. 2 bearing dust covers. 4 x 1mm spacers. 3 x 3mm spacer. 5ml CeramicSpeed All Round Grease.  

CeramicSpeed 30mm Threaded and 386Evo SRAM DUB Service Kit

Riders with a BSA, T4530, T4730 Bottom Bracket, or if they have a PF4630 on an EVO386 frame, can utilize this kit to install a DUB crank. Crank Compatibility: SRAM DUB Frame/Cup: BB30. PF30. PF30a. BBright. EVO386. BSA. T45. T47-68mm. T47-86mm.

CeramicSpeed OSPW System Cerakote Coated Campag 12 spd Pulley Wheels

OSPW for Campagnolo 12-speed EPS Cerakote Limited Edition The OSPW System for Campagnolo 12-speed EPS comes with a compact moulded carbon fibre cage for light weight and durability. The system offers a three spring tension setting that allows for optimal setup based on riding conditions. Like every other CeramicSpeed Oversized Pulley Wheel System, this is developed, designed and handbuilt in Denmark. The product comes with unique ceramic coated pulleys in Pink and White Cerakoate with a lifetime warranty. The system is not compatible with 12-speed mechanical.  

CeramicSpeed OHD SLT Headset Bearing SS 1.1/4" 35 x 47 x 7mm 36/45°

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty.  

CeramicSpeed BSA Campag UT 25mm Coated Bottom Bracket

English threading is the most common threaded bottom bracket standard these days and having a fast Campagnolo bottom bracket to fit it is the only way to get a Campy Ultra-Torque to mate. English threading the common name for BSA; the B standing for British. The shell is 68mm wide, the inner diameter 34mm, with the threading reversed on the drive side. Choose between two bearings for the crank. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag.

CeramicSpeed Single Bearing Coated 61803

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed BB Seal and Dust Cover Service Tool

Unique multifunction tool provides an easy and clever way to remove secure fitting integrated dust covers, as well as assisting in alignment and simple installation of bearing seals and/or dust cover reinstallation. Supports easy dust cover removal and installation of seals and dust covers. Integrated Shimano crank preload tool. Compatible with CeramicSpeed dust covers and seals for Shimano 24mm bottom brackets, CeramicSpeed dust covers and seals for DUB 28.99mm bottom brackets, plus reinstallation of 30mm bearing seals. For road or off-road use.  

CeramicSpeed BB86/92 DUB Service Kit

Riders with the new PF4130 design can use this kit to install a DUB crank. It is important to note that the inner race must be recessed roughly 2.8mm to provide clearance for the dust cover. this is the key change on the new PF4130 that began shipping in 2018. if the inner race (and seal) are flush with the outer race the Bottom Bracket cannot be converted for use with DUB cranks. Crank Compatibility: SRAM DUB Frame/Cup: BB86

CeramicSpeed Preload Bolt for Shimano cranks

Replaces the plastic OE preload bolt on 24mm Shimano cranks.

CeramicSpeed Preload Ring Alternative for SRAM DUB Cranks

Metal threads to ensure correct preload adjustment. Internal o-ring to provide secure fitment on crank axle without needing glue. sleek design reduces areas for dirt to collect. Compatible with all DUB CRank & BB combinations. Comes with 1 + 3mm spacers that match the outer diameter for a clean and tidy look, regardless of current BB.

CeramicSpeed Single Bearing Coated 24377

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed Single Bearing Coated 61903/18

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed OHD SLT Headset Bearing Kit Cervelo S5 2022+

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty.

CeramicSpeed Rubber Workshop Mat

Table top workshop mat for working on small components. Raised sides to keep small screws and other parts from rolling away.

CeramicSpeed OHD SLT Headset Bearing Kit Colnago G3X

The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty. For more information about CeramicSpeed SLT bearings click here This kit contains 1 x 110942 and 1 x 110940 bearings.

CeramicSpeed OHD SLT Headset Bearing Kit Specialized Aetheos, Crux

he CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Headsets: OHD (Optimized Headset Design), features a unique combination of an oil-encapsulated solid plastic polymer and stainless-steel materials which results in a self-lubricating, corrosion-resistant, and maintenance-free bearing. The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well-lubricated, while also containing sufficient oil for it to be self-lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions. The CeramicSpeed SLT OHD Bearing is designed, developed, and hand-built in Denmark and comes with a lifetime warranty. For more information about CeramicSpeed SLT bearings click here This kit contains 1 x 111820 and 1 x 111890 bearings.  

CeramicSpeed Headset Bearings for Specialized Headset 5 Shiv Tri

CeramicSpeed headset bearings will take your handling of your bike to new levels, our bearings are built by hand in Denmark to ensure the highest performance and longevity. Specialized Headset 5 comes in two variants, with our CeramicSpeed Standard Bearings and with out Coated Bearings.The Coated Bearings offer an even longer lifetime and lower friction. Learn more about the coated advantage here

CeramicSpeed Counter Top Display 2023

CeramicSpeed Single Bearing Coated 15267

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CeramicSpeed UFO Clean Bearings Cleaner - 1L

CeramicSpeed Dual Socket T45/COLNAGO/T47 Bottom Bracket Tool

CeramicSpeed OSPWX System (SRAM Eagle AXS)

CeramicSpeed OSPW Coated (No Cage, 17T)

CeramicSpeed Dustcover for Pinarello Headset (4.5mm)

CeramicSpeed Single Bearing R8

CeramicSpeed Single Bearing Coated 61802 (6802)

CeramicSpeed Single Bearing Coated 61801 (6801)

CeramicSpeed Single Bearing Coated 608

CeramicSpeed Single Bearing Coated 6001

CeramicSpeed Single Bearing 61903/18

CeramicSpeed Single Bearing 61903 (6903)

CeramicSpeed Single Bearing 61902 (6902)

CeramicSpeed Single Bearing 61806 (6806)

CeramicSpeed Single Bearing 61803 (6803)

CeramicSpeed Single Bearing 61802 (6802)

CeramicSpeed Single Bearing 15267

CeramicSpeed Bib Shorts

CeramicSpeed T4530 Coated Bottom Bracket

CeramicSpeed ITA SRAM DUB Coated Bottom Bracket

CeramicSpeed BB30 Bearing Kit Coated

CeramicSpeed BB86 CAMPY UT Bearing Kit Bottom Bracket

CeramicSpeed BB30 Bottom Bracket

CeramicSpeed EVO386 SRAM GXP Bottom Bracket