Halo Rear Fix-G Track Hub

Halo Mantradrive Drive Ring Tool

Halo Tubeless Valves

Halo MT Supadrive Rear Axle ends

Halo MT Supadrive SS Rear Hub

Halo Tubeless Sealant Injector

Halo Centerlock Adaptor

Halo T-axle conversion kit for RD Front Hub

Halo Tubeless Valves

Halo Hex Security Skewer

Halo Clickster Freewheel

Halo DJD Driver Sprocket Remover

Halo DJD SupaDrive Sprocket Remover

Halo Aero Spoke Holder

Halo Supadrive Drive Ring Tool

Halo Double Fix-G Track Hub

An ever present headache with "normal fixed hubs" is the assembly of a drive cog that is attached by a thread being pulled in both directions by the pedal torque. Of course, the traditional solution to avoiding the cog unwinding itself from the hub in the reverse direction is a left hand threaded lockring, butted up tight against the cog. But, as many riders have found out, this historic system can be relatively volatile.Halo thought... there has to be a better way: A splined hub body (with cogs that slide on) and an independent lockring... that never has to handle rotational forces from the drive."Halo's HG spline system is so obvious and brilliant that other brands must be kicking themselves for not thinking of it first: it can't slip or thread; it's way easier to fit/swap and will take down to 12t cogs, it's genius". - Ty at the Footdown (www.thefootdown.co.uk). Oct 2011 "The Fix-g hub is great! it runs smoothly as the previous Halo hub but the fact that you can move the sprocket for a perfect chainline is great and you can feel the difference straight away. Also, it's really easy to do, everyone can do it without a mechanic's help, I think you should advertise this and make it clear for everyone, people don't have to be scared of a new technology..." Ivan Fiorilla... 5th Floor riding club - London. The5thfloor.co.uk

Halo Morningstar Spin Doctor Grease Injector Tool

Halo/Morningstar Spin Doctor Grease Injector tool. Specially developed by Morningstar tooling, this relatively simple tool allows long lasting grease to be pressure injected inside the bearings and pawls of the Spin Doctor freehub - without the need for complete disassembly. To Grease; Push-in the Freehub injector tool into the end of the freehub and apply grease into the tool via a grease gun, until you can see a small amount grease purging out of the backside of the freehub. High quality grease injection will provide long lasting lubrication. This tool can also be used to purge a contaminated freehub of old lube, water and grit. (Simply continue injecting excess grease, and the excess grease will be forced out of the back of the freehub, taking with it existing contaminants.)

Halo Fix-G Track Hub

An ever present headache with traditional fixed hubs is the assembly of a drive sprocket that is attached by a thread being pulled in both directions by the pedal torque. The usual solution to avoiding the sprocket unwinding itself from the hub is a left-hand threaded lock-ring, butted up tight against the sprocket. But, as many riders have found out, this system can be quite volatile.Halo thought, there has to be a better way... and the solution - an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive.Halo Fix-G advantages: Easy and secure fixing and servicing. Adjustable chainline - 41 to 52mm. Accepts 12 - 20T sprockets. No need for chainwhip tools.

Halo DJD BD Drive Ring Tool