Box Components Hex Lab Oversized 28.6 X 1" Front Load Stem

All Box One front load stems are engineered and crafted using Oversized Technology. As we follow the load paths down the handlebars and have focused attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. By moving material from low-stress areas. This has greatly minimised twist and contributed to responsiveness. As the stem is mated with the handlebars we have contributed to increased pedalling stiffness by providing a backstop to the ‘lifting’ phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Features:   Lightweight 3D Hollow Design Front-Load Clamp Design to Fight Pull-Up Forces Large Bar Bore Large Hollow Clamping Bolts Superior Strength

Box Components 22.2 X 1-1/8" Top Load Stem

The Box Two Top Load is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength

Box Components 22.2 X 1" Top Load Stem

The Box Two Top Load Stem is a modern 1-inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. The top load stem is designed for easy of handlebar installation while maintaining superior strength.

Box Components 22.2 X 1-1/8" Front Load Stem

The Box Two front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminium.The front-load clamp is designed to fight pull-up forces while offering superior strength. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.  

Box Components 22.2 X 1-1/8" Centre Clamp Stem

Box Two Centre clamp Hollow stems are cold forged from the highest quality 6061-T6 aluminium available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.  These stems come with either a 48 or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. This stem can be installed either side up to give a 5-degree rise or drop. Note: Not compatible with forks that have carbon fibre steerer tubes  

Deda Elementi Zero100 Stem

Zero100 Stem The innovation of physical matter in a powerful design. The most advanced technology to offer the best combination of lightweight, strength and reliability. The first choice of the peloton. Finish: black on black (BOB) or black anodized with white logo Material: Alloy 2014 3D forged Handlebar Dia: 31,7mm Fork Steerer: 1" 1/8 (28,6mm) Clamp Height: 40mm Screws: CrMo Angle: 82deg Weight: 126g (110mm)

Deda Elementi Superzero Stem

Superzero Stem The new Superzero stem is the perfect combination of stiffness, lightness and aerodynamic shape. The stem has a trapezoid shape with a flattened top section for torsional stiffness and excellent aerodynamic performance. Designed for the most demanding riders, the stem is manufactured using an innovative 3D forging process with AL 2014 alloy. Fork Clamp Diameter: 28.6mm (1 1/8') Clamp Diameter: 31.7mm Material: AL2014 alloy Bolts: CrMo Steel Angle: 82 Weight: 140g (110mm)

Deda Elementi Superzero RS Stem

Superzero RS Stem The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm.

Deda Elementi DI2 Clip for Superzero Stems

DI2 Clip for Superzero Stems This innovative new DI2-Clip is a specific accessory for Deda's stunning new stem that offers a clean, smart and easy to use solution to help make Shimano's DI2 system a more integrated experience. No tools or straps are required to install the clip thanks to the simple plug-in system that has been used. Made from a thermoplastic material for lightness and durability. This only fits the Deda Superzero Stem Tech Specs Compatible with Deda Superzero Stems only Material: Thermoplastic material Handlebar Diameter: 31.7mm Finish: Black Weight: 7g

PRO VIBE Carbon Stem - 31.8mm, 1-1/8"

Bontrager Line Pro 35 0-Degree Blendr Stem

Whisky No. 7 Stem

Deda Elementi Logo Black Stem 26.0

Deda Elementi Zero1 Stem

Deda Elementi Murex Quill Stem

Deda Elementi Zero100 Stem

Deda Elementi Superleggero RS Stem

Renthal Integra 35 DM Stem

Bontrager Race Lite 4-Bolt Stem

Renthal Apex Stem