Halo Chaos Dirt Jump 26" Wheel

Chaos Dirt Jump Wheels are the World Championship winning, benchmark wheels for dirt jumping.Used and loved world over by riders and endorsed by international professionals Sam Pilgrim and Matt Jones. Chaos Dirt Jump Wheels are at the pinnacle of the sport that stand up to the hardest of use.These wheels utilise our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.The front wheel features:The brake-less DJ Wideboy hub that offers wide spaced flanges for optimum lateral wheel strength.Front Fork Compatibility: 15x100mm thru axle as standard. Optional extra adaptors are available to fit with forks using: QR 5/9x100mm, 20x100mm Thru or 20x110mm Thru. (Please see the ‘Halo Wide Boy front hub’ for more front hub option details) The Rear wheels feature 3 main hub options:DJD Rear SS Hub (Bushdrive): This great value option features a 3 pawl, 30-point engagement drive mechanism, sealed main bearings and a bush bearing system in the micro-freehub. The DJD Bushdrive freehub uses thread-on DJD sprockets (not included) DJD Supadrive SS Hub: This hi-performance option features our 120-point Supadrive mechanism, sealed main bearings and a bush bearing system in the micro-freehub. The DJD Supadrive freehub uses thread-on DJD sprockets (not included) DJD Supadrive and Bushdrive Sprockets - Thread-on DJD sprockets are 1/8” SS chain width and available in sizes 9, 10, 11, 13, 14 and 16 teeth. MT Supadrive SS Hub This hi-performance option features our 120-point Supadrive mechanism and sealed bearings throughout. The MTSS must be used with Halo Fat Foot Sprockets using a splined fit (not included) Fat Foot Sprocket - HG type spline fitting Fat Foot sprockets are 1/8” SS chain width and available in sizes 12-20T.  Frame compatibility:All 3 rear hub types fit with ‘slotted’ 10x135mm frame dropouts as standard using capped M10 Bolts.  (The two DJD models also include 10-14mm adaptors to allow fitment into 14mm slotted frame dropouts.)If using alternative frame dropouts:  12x135mm Thru axle – select the DJD Bushdrive hub and use an axle conversion kit. DJD BD 12mm Axle Kit.  Item code: HUHADBA2 12x 142mm Thru axle – select the MTSS hub and use an axle conversion kit. MT Supadrive SS 142 x 12mm Axle Kit.  Item code: HUHAZSVSR2 12 x 148mm (Boost) Thru axle – select the MTSS hub + 142mm axle kit (above) and add the Halo Boost adaptor kit:   MT Supadrive Boost Disc Adaptor.  Item code: HXHASVTB Please note:Halo's rear wheels no longer come with a sprocket included, so please choose an additional 'DJD Supadrive and Bushdrive Sprocket' for the DJD hub options or ‘Fat Foot Sprocket’ for the MTSS option to suit your bike.

Identiti Rebate XL Fork

Identiti Rebate Jump Fork

Identiti Rebate XL 1420 Fork - 1-1/8"

New XL Jump Rebates - designed for riders who have long travel suspension forks, and want to retain a closer geometry using a rigid set-up. (40mm longer - at 465mm Axle to Crown)The Task: To provide a version of the Identiti Rebate Jump fork for those riders with an existing 20mm T-axle front hub set-up.Identiti got to thinking and they figure the reason to have a 20mm T-axle set-up is to help tie the 2 wobbly ends of a suspension fork together (which, apparently, they do quite well). HOWEVER... the Rebate doesn't go up and down and therefore doesn't need any more lower leg rigidity than a conventional QR hub will give... because - erh - it's a flamin' RIGID FORK to start with!So... do Identiti need all manner of heavy dropouts together with fiddly and farty bolts onto the 20mm T-axle that make the fork heavy and make wheel removal a pain? ...Well, they don't think so... Plus, wouldn't it be handy if the finished fork and axle set-up could accept BMX pegs - if you want?Hence... the REBATE 1420 is supplied with a 20/14mm axle conversion system, and lightweight CNC relieved 14mm BMX style dropouts. This means that the REBATE 1420 will accept your regular 20mm T-axle hub and finishes with straight forward, nice and easy to use BMX style 14mm threaded axle and nuts. This is way way stronger than the bare minimum system that the Rebate needs, and way way lighter/faster to use than a normal 20mm T-axle set-up.An I.S, disc mount is welded on in case you need that disc brake, and of course, you can also retro-fit the Identiti V-adaptor brake pivots at 24 or 26" if you want. On top of all of this - you still get the Rebate Jump fork specifications of variable wall thickness heat treated CNC steerer and butted and spiral re-enforced legs... things that make the Identiti REBATE one of the strongest and lightest forks out there...

Identiti Rebate 1420 Fork

BMX style JUMP fork.The Task: To provide a version of the Identiti Rebate Jump fork for those riders with an existing 20mm T-axle front hub set-up.Premium 4130 Cr-mo Deep drop steerer crown allows shallow bend radius legs and large weld area for increased strength. Fluted and butted 31.8mm legs are both light and strong. The internally and externally machined steerer offers optimised strength and weight, without the stress rising areas that changes in diameter over short distances can cause. Super buff 6mm thick BMX style dropouts, CNC machined for light weight.  I.S. Disc mounts included. Short Suspension Corrected length provides crisp steering.The REBATE 1420 is supplied with a 20/14mm axle conversion system, and lightweight CNC relieved 14mm BMX style dropouts. This means that the REBATE 1420 will accept your regular 20mm T-axle hub and finishes with straight forward BMX style 14mm threaded Axle and nuts.Optional extra clamp-on V-pivot system for either 24 or 26".